Windows 10: I switched my ssd from my pc to another pc on the new pc i am experiencing %50 and...

I am using a windows 10 pc with 8gb ram AMD radeon r7 200 series - IntelR CoreTM i5-4590 CPU - @ 3.30GHz 4 Cores cpu, continuing onto the question the processes are taking up more cpu then the games do and even when I swapped it back into my first pc its still got the same cpu problems and sometimes when i open taskmanager i see its running high then goes down lower but usually its high cpu problems. any help woud be appreciated.

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

new pc 1tb hdd to ssd clone advice needed

Ive just bought a brand new lenovo pc which has windows 10 home 64bit and has a 1tb hard drive fitted, im looking for advice on the following.

Ive fitted the ssd into the pc but its not shown up so need step by step guide on how to make it active ?

Next I need help on how to clone the 1tb hdd to the
Ssd drive, step by step and best software to use and have the ssd as the main drive then use the the 1hdd for storage.I just dont want to break my new system
Thanks for your time.

 

PC Build Steps

1.1 - Ideally put optical in SATA 0, and SSD in SATA 1, this will cause the optical drive to be the default 1st boot option. You can change it manually if not, but I like it this way
2.infinity - yes, that's fine. if it's above 70 +/- 5 degrees, then it may just need a repaste/remount