Windows 10: i want to disable UA setting

issue regarding ucs

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

settings must be disabled

If his CPU isn't under load it sounds like SpeedStep, which lowers you voltages and clock speed in various steps depending on the load. For example, my CPU will sit at 1.5Ghz idle (x12 multi), and will step up to various different frequencies. So unless your fully loading your machine or if you disable power saving features, the CPU clock is going to go down on its own. This isn't a bad thing, it saves power and reduces heat, but you might not be able to overclock as high if the machine becomes unstable in a low power state because of the different frequencies and voltages.