Windows 10: I was double-charged in the Microsoft Store on 5/19/23 when I was upgrading to Windows for...

I was double-charged in the Microsoft Store on 5/19/23 when I was upgrading to Windows for Business. I entered my credit card information but when I tried to complete the transaction I got a message that it was unable to accept this credit card. I entered a second credit card and received the same information. I knew my cards were valid so I assumed that something was going on with the website. I tried again the next morning and when I reached the processing page the transaction went through without me having to enter any credit card information. I assumed that one of the charges went thr

:)

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Charging stuck at 70%

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Radio Switch Device Error Code 19

Hi Kara,

Thank you for bringing up your query on Microsoft Community.

We sincerely regret for the inconvenience caused, and appreciate the steps you have taken so far to fix this issue.

The error code 19 describes that, Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.

Recommended resolution

• Uninstall and reinstall the driver.
• Revert to the most recent successful registry configuration.
  

Before we could reset the computer to factory settings, I suggest you to refer to the below article and perform the troubleshooting steps suggested for error code 19.

Error codes in Device Manager in Windows.

https://support.microsoft.com/en-us/kb/310123#bookmark-19

Hope it helps.

Let us know the status, we are happy to assist you further.