Windows 10: if you bsod a VM will it actually appear on your main pc

i wanted to know what will happen if you "bsod a VM will it actually appear on your main pc"

because i LOVE pc errors and console errors but my pc is fine i dont want any bsod

if you can help please do


-BroLJ

*** Email address is removed for privacy ***

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

Win 10 BSOD after reducing number of CPUs

• Win 10 x64 running in VMware Fusion VM on MacBook Pro w/ 6 physical cores & HT.
• When VM is configured with 5+ CPUs, Windows runs fine.
• When VM is configured with 4 or fewer, BSOD INVALID SYSTEM CONFIG INFO
  • WINLOAD.EFI missing or corrupted
  • Attempt to repair using ISO image fails

OS X 10.15.4, VMware Fusion Pro 11.5.3

Win 10 Enterprise

Version 1703

Build 15063.2108

Any suggestions appreciated, as I need to move this VM to another HW config with fewer physical CPUs.

Thanks!

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.