Windows 10: I’m factory resetting my pc, but it’s stuck at 10%

Problem is in the title, it’s stuck at 10% for a while right now. How to fix this? Can’t really do anything

submitted by /u/iSvenNL
[link] [comments]

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Stuck during factory reset.


So the Factory reset has been stuck at 2% for the last 8 hours.

 

Windows 10 factory reset stuck on 61


Hey I need help really badly, yesterday I upgraded to windows 10 from windows 7 and then I realized that all my files stayed which I didn't want all my files so I did a factory reset on my windows 10 upgraded PC and it has been stuck at 61% for about 8-9 hours. The circle loading is still moving but the percentage is stuck at 61. I am worried to turn off my PC in case of it being ruined. Thanks.