Windows 10: I'm Getting bluescreen after booting into windows after Ram change can someone help?

I recently bought a new ram for my laptop cause one of my ram slots stopped working for some reason and i tested the ram and both are good, so I'm moving from a 2x8gb 3200mhz to a 1x32gb 3200mhz. So i got the ram and a new thermal paste for the laptop about two days ago and i simply just swapped over the ram and booted to check if everything was ok. It worked fine so turned off the laptop reappled the new thermal paste to the cpu to gpu and now when i boot to the lockscreen it bluescreen instantly. I've tried all the troubleshooting methods such as booting in the safe mode and using ddu to wi

:)

 

No Boot, Drives Not detected, Can't Load Win10 Pleses Help!

Until the BIOS sees your M.2, there's nothing you can do. It does not matter if the M.2 is unformatted/unallocated, the BIOS should see it.

1. Suggest that you take the M.2 out, clean all the contacts and re-seat it and hope this is the case.
2. If step one fails. Connect your 250GB SSD back in using one of the SATA port to see if the BIOS recognize it. If it doen't, then it might be something wrong with the MB, if it does then boot up the Windows Installation USB, run diskpart, shrink it at least 40GB then create a partition, Leave it unallocated then install Windows there.

Also try to re-seat all other components such as Memory, Video card etc...

 

HD 6870 Bluescreen, cannot boot to Windows

Hello, I'm confused about what happened to my graphics card

It suddenly crashed while I was playing game, and then it cannot boot to Windows. Encountered bluescreen which says something about atikmpag.sys error.

I can still boot to safe mode, and tried to uninstall the driver. Only then I can boot to Windows.

But I can't seem to get the driver installed correctly again. I've used driver sweeper, and CCleaner to kinda make sure nothing left in the registry.

Everytime I installed the driver and restart the computer, the bluescreen returns. Forcing me to uninstall it to make it working (able to boot to windows) again.

It's working if I put another graphics card (I have a spare HD5750) so I just assumed that my HD6870 died because of a hardware issue.

But really, what happened to my HD6870? Is there any chance to fix the problem?

Thanks

 

Constant Bluescreens/Crashes

I did that during the part where i set all the stuff to how LifeOnMars suggested