Windows 10: Im having issues with resetting my PC.

I am having an issue with my. I go to settings and reset my PC. The reset goes through with its preparations to reset then it proceeds to a blank screen. Nothing at this point happens.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

resetting the pc

Hi,

There is a possibility that this is due to software corruption. To properly isolate the issue, kindly verify the following:

• Have you performed Reset this PC option?
• Did you encounter any error messages?
• Any recent changes made on the computer prior to the issue?
• What troubleshooting steps have you done to fix the issue?
  

We're looking forward to your response.