Windows 10: I'm trying to install windows. My SSD doesn't show up in List Disk, but it does show up in...

I have an Hp pavilion x360 convertible model 15t-dq200. I am trying to install a Samsung 970 evo plus SSD.I set up a windows boot USB flash drive. I have tried both Windows 10 and Windows 11, and have had the same results.When I get to the "Where do you want to install windows" screen, it tells me "We couldn't find any drives. To get a storage driver, click load driver". As the post's title suggests, when I open administrator, and use DISKPART and LIST DISK, I see both of my USB drives, but not my ssd. However, the SSD does show up in BIOS under UEFI HII Configuration.

:)

 

M.2 SSD Drive With Windows 10 Listed as Disk 1 in Disk Management,

Hi, In my pc M.2 SSD with Windows 10 OS is listed as Disk 1 and not as Disk 0 in Disk Management. Also, the same drive is listed as Removable devices which is actually internal SSD.

Can anybody help me resolve this, please?

 

M.2 SSD doesn't show up in BIOS and Windows installer

That SSD is indeed SATA (not PCIe / NVMe).

Check that it's properly seated. Once you have it detected, it will likely show up as one of the SATA devices (not an M.2 device). From the manual:

Additionally, I noticed in your motherboard's manual, that it has two M.2 ports:

• M.2_1 supports both SATA & PCIe 3.0 x4
  
• M.2_2 supports only PCIe 3.0 x4
  

Make sure that you have the SSD in the correct port (labelled M.2_1).

Also, make sure that you don't have another disk connected to the SATA6G_1 port (top).

Please just go through the motions to be 100% sure (even if you think you tried it).

1. Power off
   
2. Install SSD into M.2_1
   
3. Disconnect any drive / cable from SATA6G_1
   
4. Enter the BIOS and set M.2_1 to SATA mode
   
5. Save configuration and reboot
   
6. Check devices found by BIOS again
   

 

Help! Data partition not showing under my computer

This is happening on a windows 2000 server. Our second partition of the system, for data is not showing under my computer. Here are the properties of it in disk management:





Now under logical drives its listed as F and shows free space available.

Suggestions on how to fix this?