Windows 10: Imaging devices can't start. Code 10

Ganu9890 · Sep 9, 2021

Sir I have problem regarding imaging devices, that they are showing this error as this device can't start, I have uninstalled and reinstalled, updated the driver like thousand of time still this is showing the error

:)

Radney Dri · Sep 9, 2021

HID-compliant mouse. Device Status:This device cannot start. (Code 10)

Have you tried updating the driver for the HID-compliant mouse?

Follow these steps on how to update the driver:

To do this, follow these steps:

In Device Manager, click the Driver tab in the device's Properties dialog box.

Click Update Driver to start the Hardware Update Wizard.

Follow the instructions to update the driver.

If that does not work, we suggest you contact the manufacturer of your laptop directly and ask for updated drivers for Windows 10.

Regards.

zbook · Sep 9, 2021

BSOD - Inaccessible Boot Device

The reset save files equivalent if successful should be the quickest method to get you backup and running.

The backup files then clean install is the best option as you fix many problems and start fresh.

The command prompt commands are all trial and error.

Code:

1) bcdedit /enum
2) bcdedit | find "osdevice"
(note the partition drive letter displayed in the result as this drive letter will be used in many of the later commands)
Click to expand...

Code:

3) diskpart
list disk
list volume
select disk 0
detail disk
list partition
select partition 1
detail partition
select partition 2
detail partition
select partition 3
detail partition
select partition 4
detail partition
select partition 5
detail partition
select disk 1
detail disk
list partition
select partition 1
detail partition
select partition 2
detail partition
select partition 3
detail partition
select partition 4
detail partition
select disk 2
detail disk
list partition
select partition 1
detail partition
select partition 2
detail partition
select partition 3
detail partition
select partition 4
detail partition
select disk 3
detail disk
list partition
select partition 1
detail partition
select partition 2
detail partition
select partition 3
detail partition
select partition 4
detail partition
select disk 4
detail disk
list partition
select disk 5
detail disk
list partition
select disk 6
detail disk
list partition
exit
(post an image of the results into the thread)
Click to expand...

Code:

4) chkdsk /r /v T:
(replace the drive letter T: with the partition drive letter displayed in the result for step 2)
(This may take many hours and typically displays ETA)
(reboot to run the command)
(post an image of the result into the thread)
(reboot after the command completes to check the boot)
(reopen command prompt for the next step)
Click to expand...

Code:

5) dism /image:T:\ /cleanup-image /revertpendingactions
(change the drive letter T: to the drive letter displayed in the result for step #2)
(reboot after the command completes)
(reopen command prompt to run the next command)
Click to expand...

Code:

6) dism /Image:T:\ /Get-Packages
(change the drive letter T: to the drive letter displayed in the results of step #2)
(Run the following command on the last installed package:
example: dism.exe /image:T:\ /remove-package /packagenameackage_for_KB4014329~31bf3856ad364e35~amd64~~10.0.1.0
(change the drive letter T: to the partition drive letter displayed in step #2)
(Reboot)
(perform this command on multiple KB as needed to go back in time to before there were boot problems)
Click to expand...

Code:

7) sfc /scannow /offbootdir=T:\ /offwindir=T:\windows
(change the drive letters T: to the drive letter displayed in result for step #2)
(This command may take a while to run)
(post an image of the results into the thread)
(reboot to check the boot)
(open command prompt for the next step)
Click to expand...

Code:

8) bootrec /fixmbr
9) bootrec /fixboot
10) bootrec /scanos
11) bootrec /rebuildbcd
(post an image of the result into the thread)
(reboot after the command completes to check the boot)
Click to expand...

StefanM · Sep 9, 2021

Alienware R4 M290x Code 43 HELP

Advice from Microsoft: Graphics device driver error code 43

Windows stopped your device because it reported problems. To fix it, try the following:

Select the Start button, then in the search box next to Start, type device manager and select Device Manager from the list of results.

Find the problematic device in the list (it will often have a yellow exclamation point icon next to it).

Press and hold (or right-click) the name of the device, and select Properties. In Properties, select the Driver tab, select Roll Back Driver, then follow the steps. If the button is unavailable, that means there's no driver to roll back to.

Select Uninstall device and then select Uninstall.

At the top of the list of devices in Device Manager, press and hold (or right-click) the name of your PC, then select Scan for hardware changes. This reinstalls the device driver.

To see if this fixed the problem, press and hold (or right-click) the name of the device again and select Properties. On the General tab, under Device status, you should see This device is working properly. If you don’t see this message, refer to the documentation that came with the device or contact the manufacturer.

Click to expand...

Windows 10: Imaging devices can't start. Code 10

Imaging devices can't start. Code 10

Imaging devices can't start. Code 10

Imaging devices can't start. Code 10

Imaging devices can't start. Code 10 - Similar Threads - Imaging devices can't

This device cannot start. (code 10)

Device Cannot Start Code 10.

Network devices fail to start (Code 10)

Device Manager Portable Devices: This device cannot start (Code 10)

Device Manager Portable Devices: This device cannot start (Code 10)

This device cannot start. (Code 10) windows 10

this device cannot start (code 10)

This device cannot start (code 10)

Error code 10 (This device cannot start)