Windows 10: in device manager, how to correct forcepad errors

In device manager, how to correct Forcepad errors?

:)

 

Synaptics ForcePad Firmware1.00.2 driver has a yellow exclamation triangle on device manager

Good Day c_2806,

Yes, please proceed with the steps below.

-Go to Device Manager

-Expand the Firmware

-Look for Forcepad driver that was installed

-Right click and Uninstall

-Go to Device Manager

-Expand the Human Interface Device or Mice and other pointing device

-Look for HID Touchpad driver that was installed

-Right click and Uninstall

Once uninstalled go to this link below and download and install the driver.

https://download.lenovo.com/consumer/mobiles/vj...

Restart once done and check.

Have a wonderful day ahead and stay safe.

Sincerely,

Carlo T.

------------------------------------------------------------------------------------

Standard Disclaimer: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

 

No hardware listed in Device manager?

I don't konw whathappend but in Device manager and in my Network connections there is nothing where there used to be a Modem listed and all my hardware in Device Manager. What happend and how do I fix this?

 

Error: No work available to process

Hmm. Either it's put out errors and WCG is limiting the work units available, or the project list may not be set to supply other WU when one runs out. (if the problem lies here and not on your end)

On the options to your left, if you go into Results Status, select the computer from Device Name and then look through results see if either they were returned late, errors or any other kind of issue that would stop the servers supplying WU from that perspective.

If there are no errors then it's maybe down to your project list. So selecting Device Manager from the left menu and then clicking on the profile assigned to that computer and make sure that it's assigned to receive WU for other projects if they run out.

At least those steps will rule out problems from the WCG end.