Windows 10: In file explorer I've 2 istances of my router same MAC, same ID univoque. what can I do to...

In file explorer I've 2 istances of my router same MAC, same ID univoque. what can I do to delete one?ThanksPierugo

:)

 

Nokia 5800 WLAN Mac Filtering Issue with linksys router

I used the code "*#62209526# " to check the MAC Address, i also verified this through the wireless client list for the router.

DHCP is already enabled.

keep in mind that i have no problems connecting with the router if the MAC Filtering is turned off. The issue is that when i enter the MAC Address of my mobile in the filtering list it says "The MAC Address cannot be the multipart address".

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Phantom router on network

Recently I've noticed a "phantom" router appearing in my network. The Belkin router is not mine, the Linksys is.

Properties of the Belkin router list serial number, MAC address, model number, model, manufacturer, but no IP address. It only shows up on my desktop, not the Pro 3's or HP laptop's File Explorer under Network.

Desktop is connected to network with a Netgear WNDA3100v3 N600 Dual Band USB Adapter - WPA2-PSK security type. Pro 3 and Laptop connect to network with their internal wireless connections

Haven't noticed any "strange" behavior, or usage, on my machines, but am curious as to why it is appearing in my network.

Also, any suggestions for a program that will scan the network and list all units "attached" to it?