Windows 10: IN MY PC BLUETOOTH IS NOT WORKING WHEN I WAS OPEN FIRST TIME PC AND AFTER THIS TIME ITS IS...

MERE PC KA BLUTOOTH JAB SE BUY KIYA HU TAB SE WORK NHI KARTA HAI. PLEASE HELP ME TO SOLVE THE PROBLE.

:)

 

Can't sync pc time with any time server...

Thanks for reaching out! I'm an Independent Advisor and a Microsoft user like you.

To resolve the issue of a Windows 11 PC not syncing time with any time server, you can follow these detailed troubleshooting steps:

1. Verify Windows Time Service

Ensure the Windows Time Service is running and set to start automatically.

1. Press Windows Key + R, type services.msc, and press Enter.
   
2. Scroll down to find "Windows Time" and double-click on it.
   
3. Set the "Startup type" to "Automatic" and click "Start" if the service is not running.
   
4. Click "Apply" and then "OK".
   

2. Re-register and Restart Windows Time Service via Command Prompt

1. Open Command Prompt as an administrator.
   
2. Execute the following commands:
   
   
   These commands stop the service, unregister and re-register it, restart it, and force a resync.
   

3. Change Time Server

Switch to a different time server to see if that resolves the issue.

1. Open Control Panel and go to "Date and Time".
   
2. Click on the "Internet Time" tab and then "Change settings".
   
3. Select a different server from the dropdown list (e.g., time.nist.gov) and click "Update now".
   

4. Adjust Registry for Time Synchronization

Modify the registry settings to ensure proper synchronization intervals.

1. Open regedit and navigate to:
   
   
2. Find the "SpecialPollInterval" entry and change its value to a lower number (e.g., 3600 for one hour).
   

5. Check Network and Firewall Settings

Ensure your network and firewall settings are not blocking time synchronization.

1. Verify that your PC has internet access and can browse websites.
   
2. Temporarily disable Windows Firewall and attempt to sync the time again.
   

6. Set Windows Time Service to Trigger Automatically

Use the SC command to configure the Windows Time Service to start when the network is available.

1. Open Command Prompt as an administrator.
   
2. Execute the following command:
   
   

7. Update Group Policy Settings

Ensure correct Group Policy settings if you have access to the Group Policy Editor (not available in Windows 11 Home).

1. Open gpedit.msc.
   
2. Navigate to Computer Configuration -> Administrative Templates -> System -> Windows Time Service -> Time Providers.
   
3. Ensure "Enable Windows NTP Client" is set to "Enabled" and configure the NTP server settings.
   

8. Additional Troubleshooting Steps

If the above steps do not resolve the issue, consider the following:

• Check the CMOS battery if your PC's clock resets on every boot.
  
• Manually set the time zone and date/time, then attempt to sync again.
  
• Ensure the "NtpServer" registry entry is correctly set and not empty.
  

Please do let me know if the method I suggested works for you or if you need further assistance.

 

iPhone to pc Bluetooth

Hi DianeFrigon,

Thank you for writing to Microsoft Community Forums



You may want to answer these questions to get more clarity on this issue:

1. Are you getting any error message?
   
2. Have you made any changes to the computer prior to the issue?
   
3. Did you try paring Android mobile to PC?
   

I suggest you to follow the below steps and check if it helps.

Step 1:

Turn on Bluetooth on your iPhone which you link to pair on Windows PC.

Note: Turn on Bluetooth on iPhone, tap settings, tap Bluetooth, and then turn on Bluetooth.

1. Open settings on Windows 10 PC
   
2. Select Devices and select Bluetooth
   
3. Below Manage Bluetooth devices select, turn on the Bluetooth option.
   
   
4. Windows 10 will start searching for Bluetooth devices, in few seconds, your IPhone name will appear in manage Bluetooth devices sections.
   
5. Click on pair button
   
6. It will prompt for the passcode on Windows 10 PC
   
7. Check whether passcode is appearing on your IPhone
   
8. Click Yes button on your PC, and then tap pair option on your IPhone to pair with Windows 10 PC via Bluetooth.
   

Hope it helps

Let us know if you got the help you needed by clicking Yes Or No.



Mithin EJ

Microsoft Community- Moderator

 

Bluetooth not existing after format of PC.

Hi,

If your Bluetooth hardware is missing after resetting your PC, this can be a result of a corrupted, outdated, or missing driver. As an initial step to get Bluetooth working, we suggest that you follow the steps provided on this

link. Click the drop-down arrow for the Bluetooth doesn't appear and there are no unknown devices listed in Device Manager section to view the appropriate steps.

Let us know should you need further assistance.