Windows 10: Inaccessible Boot device - Windows 11 - After updating the Bios

Inaccessible Boot device - Windows 11 - After updating the Bios

:)

 

Bios update and "Inaccessible Boot Device" error

Hello everyone,

I just updated my bios(as Lenovo vontage suggested to me). Everything was going well till the windows restarted and then I got the "Inaccessible Boot Device" error on a blue page, and then I stuck in the "preparing automatic repair" page. I used the NOVO
button to access to troubleshooting section and nothing happened. I appreciate it if anyone has a suggestion. I tried some solutions but they did not work

thanks a lot

 

INACCESSIBLE BOOT DEVICE after Win10 Update

1) Find a flash drive that you can format ( > or = 8 GB)
2) Create a bootable windows 10 iso:
Download Windows 10
4) Insert the flash drive into any USB port
5) Open the BIOS and temporarily change boot order so that you can boot using the flash drive.
6) When the iso loads choose language, time, currency, and keyboard, or click next
7) In the left lower corner click "repair your computer"
8) Click troubleshoot
9) Click command prompt
This should open: Administrator: X:\Windows\system32\cmd.exe > X:\Sources>

For all of the steps please use a camera or smart phone camera to take pictures and post images into the thread.

10) type: bcdedit | find "osdevice"
11) This may display osdevice partition=C:
12) type: diskpart
13) type: list disk
14) type: list volume
15) look under the column heading Fs for any volume that displayed RAW instead of NTFS
16) type: chkdsk /f /r G: (change G to the drive letter of the volume displaying RAW)
It may display "The first NTFS boot sector is unreadable or corrupt."
This may then convert the RAW volume to NTFS.
17) Type: exit
18) reboot to open the Windows advanced troubleshooting menu > command prompt > Administrator: X:\windows\system32\cmd.exe > X:\Sources>
19) type: bootrec /rebuildbcd
It may display:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes(Y)/No(N)/ALL(A):
20) Type: Y
The operation completed successfully.
X:\Windows>
21) Type: exit
22) reboot
See if the inaccessible boot device problem was fixed.

If the above did not fix the inaccessible boot device the next step is to remove the recent update:
23) Open command prompt > Administrator: X:\Windows\system32\cmd.exe > X:\Sources>
24) From the first command displaying the partition if the drive letter is different than C: please use the displayed drive letter for the next step
25) type: DISM /image:G:\ /cleanup-image /revertpendingactions (change G to the applicable drive letter)
26) This should remove the latest update and fix the inaccessible boot device.
27) If this does not fix the inaccessible boot device plan a registry repair.

Report into the thread your progress with images of the above steps.

 

Update to 17063 fails - inaccessible boot device

1) Find a flash drive that you can format ( > or = 8 GB)
2) Create a bootable windows 10 iso:
Download Windows 10
4) Insert the flash drive into any USB port
5) Open the BIOS and temporarily change boot order so that you can boot using the flash drive.
6) When the iso loads choose language, time, currency, and keyboard, or click next
7) In the left lower corner click "repair your computer"
8) Click troubleshoot
9) Click command prompt
This should open: Administrator: X:\Windows\system32\cmd.exe > X:\Sources>

For all of the steps please use a camera or smart phone camera to take pictures and post images into the thread.

10) type: bcdedit | find "osdevice"
11) This may display osdevice partition=C:
12) type: diskpart
13) type: list disk
14) type: list volume
15) look under the column heading Fs for any volume that displayed RAW instead of NTFS
16) type: chkdsk /f /r G: (change G to the drive letter of the volume displaying RAW)
It may display "The first NTFS boot sector is unreadable or corrupt."
This may then convert the RAW volume to NTFS.
17) Type: exit
18) reboot to open the Windows advanced troubleshooting menu > command prompt > Administrator: X:\windows\system32\cmd.exe > X:\Sources>
19) type: bootrec /rebuildbcd
It may display:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes(Y)/No(N)/ALL(A):
20) Type: Y
The operation completed successfully.
X:\Windows>
21) Type: exit
22) reboot
See if the inaccessible boot device problem was fixed.

If the above did not fix the inaccessible boot device the next step is to remove the recent update:
23) Open command prompt > Administrator: X:\Windows\system32\cmd.exe > X:\Sources>
24) From the first command displaying the partition if the drive letter is different than C: please use the displayed drive letter for the next step
25) type: DISM /image:G:\ /cleanup-image /revertpendingactions (change G to the applicable drive letter)
26) This should remove the latest update and fix the inaccessible boot device.
27) If this does not fix the inaccessible boot device plan a registry repair.

Report into the thread your progress with images of the above steps.