Windows 10: Installing .NET3.5 SP1 (DotNetFX35SP1\dotNetFx35setup.exe)

Hi,


I have been "trying" to install NET 3.5 and cannot. Here is the log and I don't know how to get to install. I have giving it "Admin" rights and it is a corp PC.

'C:\Users\ME_Trying_User\AppData\Local\Temp\VSDF6EF.tmp\install.log' for more information.


The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.2.0 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Unable to read registry value
Not setting value for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Skipping ByPassIf because Property 'DotNet35SP' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0': false
Result of running operator 'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64': false
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Install'
'.NET Framework 3.5 SP1' RunCheck result: Install Needed
EULA for components '.NET Framework 3.5 SP1' was accepted.
Copying files to temporary directory "C:\Users\ME738\AppData\Local\Temp\VSDF6EF.tmp\"
Downloading files to "C:\Users\ME_Trying_User\AppData\Local\Temp\VSDF6EF.tmp\"
(10/4/2018 1:32:42 PM) Downloading 'DotNetFX35SP1\dotNetFx35setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=118076' to 'C:\Users\ME_Trying_User\AppData\Local\Temp\VSDF6EF.tmp\'
Download completed at 10/4/2018 1:32:45 PM
Verifying file integrity of C:\Users\ME_Trying_User\AppData\Local\Temp\VSDF6EF.tmp\DotNetFX35SP1\dotNetFx35setup.exe
WinVerifyTrust returned 0
File trusted
Running checks for package '.NET Framework 3.5 SP1', phase BeforePackage
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Unable to read registry value
Not setting value for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Skipping ByPassIf because Property 'DotNet35SP' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0': false
Result of running operator 'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64': false
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Install'
'.NET Framework 3.5 SP1' RunCheck result: Install Needed
Verifying file integrity of C:\Users\ME_Trying_User\AppData\Local\Temp\VSDF6EF.tmp\DotNetFX35SP1\dotNetFx35setup.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\ME_Trying_User\AppData\Local\Temp\VSDF6EF.tmp\DotNetFX35SP1\dotNetFx35setup.exe' and parameters ' /lang:enu /passive /norestart'
Process exited with code 1603
Status of package '.NET Framework 3.5 SP1' after install is 'InstallFailed'

:)

 

Vista Pre-SP1 vs. Vista SP1

I've been Windows Updating for two straight days and I finally saw SP1. If you want to troubleshoot it, follow these steps:

• Show hidden updates
• Manually install any failed updates (google the KB_____ and install from the windows site)
• Make sure everything in Device Manager is good to go

I had to do step two for like 4 or 5 updates to be able to see SP1.

Any other benchmarks you guys want to see? I might try PCMark05 (I think it works on Vista).

 

.net framework 3.5 sp1 not installing

All right.. this is the funny a$$ part.. So.. TRT, I did what you said.. then did something I should of did WAY before starting this.. Reg cleaner.. lol..


So.. my steps..

• Uninstall everything to which it's just .net framework 2.0
  
• Restart
  
• Install 3.5 sp1 via *Stick Out Tongue rogram and Features: Turn off....
  
• Restart
  
• Reg clean threw CCleaner 4 times, every time had a issue.
  
• Verify that all .net up to 3.5 sp1 was installed and been verified to be working
  
• went to website
  
• saw a action to "run test" to see if system is compatible.
  
• Allowed Firewall/ windows defender to run said program (says it's a low grade trojan
  
• Went to issued program and opened..
  
• Worked..

lol... oh, how stupid I was.. I all ways run reg cleaner on new os's... My mind is losing myself... *Roll :roll:

 

Windows Vista SP1 Install Troubleshooting

Okay I got these from customer service from Microsoft, I'm going to post them here, so people don't need to go through that, or for those who can't.


I did all of these except the last one, I just reinstalled Vista because i was having another error, but the last one probably would have fix it

Good luck on fixing yours, if anyone is having trouble

(I don't think anyone has posted anything pertaining to this)
1-----------------------------------------------------
Things to Know Before You Download Windows Vista SP1

http://msdn2.microsoft.com/en-us/windowsvista/bb968895.aspx

Installing SP1 requires a minimum of 5 GB free disk space on the Windows partition. The recommended free disk space is as follows:

• 7 GB Recommended for 32-bit Windows Vista

• 12 GB Recommended for 64-bit Windows Vista

If your original system is an OEM (Original Equipment Manufacturer) version preinstalled in the computer, I recommend contacting the computer manufacturer before installing Windows Vista SP1. Please ask them if any of the software applications and hardware drivers need to be updated for Vista SP1. Otherwise, installing Vista SP1 may cause unexpected problems.

The installation may take more than 45 minutes, depending on the system. The system will reboot several times during the installation. Please do not turn off the power manually. If we are using a laptop, please connect it to the AC Power Adapter.

After that, I recommend downloading Windows Vista Service Pack 1 in Normal Mode and installing it in Clean Boot Mode. Please follow the steps below.

Step 1: Download Windows Vista Service Pack 1 Standalone Installer

===================================================

1. Download Windows Vista SP1 from the link below according to your System Type:

Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 434.5MB)

http://download.microsoft.com/downl...4c056d4c34d/Windows6.0-KB936330-X86-wave0.exe

Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 726.5MB)

http://download.microsoft.com/downl...c1f58727b8b/Windows6.0-KB936330-X64-wave0.exe

2. Please save it on the Desktop.

Step 2: Install Windows Vista SP1 in Clean Boot mode

========================================

Please disable all startup items and third party services when booting to avoid conflict when installing Vista SP1:

1. Click "Start", type: MSCONFIG in the search box and press Enter.

Note: Please click "Continue" if the "User Account Control" window pops up.

2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).

3. Click "Startup", click "Disable All" and click "OK".

Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.

4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows Vista SP1.

To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.

2---------------------------------------------------------------------

Step 1: Manually install and run CheckSUR

========================

1. Click "Start", click "All Programs", click "Accessories", right-click "Command Prompt", and then click "Run as administrator".

2. In the User Account Control dialog box, click "Continue".

3. Input the following commands in the DOS Prompt window and press ENTER at the end of each line:

REG ADD HKLM\COMPONENTS /V STORECORRUPTTIMESTAMP /T REG_SZ /D "0" /F

REG DELETE HKLM\SOFTWARE\MICROSOFT\WINDOWS\CURRENTVERSION\CHECKSUR\

Note: You can copy the above commands, right click in the opened command window, and then choose Paste. Press ENTER and you will receive a message "The operation completed successfully". You may receive an error message indicating that the related registry key does not exist. Please continue to perform the remaining steps.

4. Please download and run CheckSUR tool from the link below according to your System Type:

CheckSUR tool for Windows Vista 32-bit

http://download.microsoft.com/downl...9327-1dba0b43ccd1/Windows6.0-KB947821-x86.msu

CheckSUR tool for Windows Vista 64-bit

http://download.microsoft.com/downl...aac7-2db2003972d5/Windows6.0-KB947821-x64.msu

5. Double click on the downloaded file to run the CheckSUR tool and restart the computer to check the results.

If we can install this hotfix, please continue to reinstall Windows Vista Service Pack 1 (SP1).

If the error code persists, to resolve this issue, we need Windows Vista Installation Disk to repair Windows. Please be assured that this solution is the most efficient way to resolve this Windows Update issue.

3----------------------------------------------------------------------------------------

Step 2: In-Place Upgrade

================

Note: After performing In-Place Upgrade, your personal data and installed programs usually will not be removed but we may need to run Windows Update to install all the available updates for your system to update these system files to the current version. You can back up personal files in case of unexpected issue. This troubleshooting process is time consuming. Your patience is highly appreciated.

If you would like to perform the In-place Upgrade, let’s refer to the following steps.

1. Start the computer by using the current Operating System.

2. Insert the Windows Vista DVD in the computer's DVD drive.

3. Use one of the following procedures, as appropriate:



• If Windows automatically detects the DVD, the Install now screen appears. Click Install now.

• If Windows does not automatically detect the DVD, follow these steps:



a. Click Start, click Run, type Drive:\setup.exe, and then click OK.



Note Drive is the drive letter of the computer's DVD drive.

b. Click Install now.



4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows Vista.


4---------------------------------------------------------------

1. Back up your personal files, format and reinstall