Windows 10: Installing win10 on m2 and battery problem

Hi guys, I got a new Samsung 500gb m2 for my legion y530 , I was reading the steps of downloading win10 that I should unplug hdd and download the windows on m2 and then plug the hdd again and that was clear .... but some say that I should unplug the battery first before unplugging the hdd because it may cause some trouble with the board , is that true ?

Thank you.

submitted by /u/nope_007
[link] [comments]

:)

 

Win10 Preview install problems

I had that problem when I went to install Win10 preview. I've never had to install the ahci driver for my mobo/SSD in Windows 7 install, but had to for Windows 10. I also used the GPT partition for the record.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Win10 Preview install problems

Fill out your specs maybe?