Windows 10: IntelR Ethernet Connection I217-LM This device cannot start. Code 10 {Operation Failed}...

The device on starting the PC doesn't work Although i installed the latest driver from intel official websiteI can get it working by disabling and enabling the device again but this operation is frustrating because i need to do it every time i open the PC if there is a solution to this i would be very thankful

:)

 

How can I solve the code 10 problem with my ethernet adapter "Intel (R) ethernet connection I217-LM"

Body: Hello everyone,

I'm experiencing a persistent issue with my Intel Ethernet Connection I217-LM onboard adapter. The adapter is displaying a "Code 10" error in the Device Manager, which indicates that the device cannot start. I've exhausted various troubleshooting steps, and I'm seeking assistance from the community to help resolve this issue.

Problem Description:

• Operating System: [Windows 10, version 22H2]
  
• Motherboard: [HP ProDesk 600 G1 TWR]
  
• Network Adapter: Intel Ethernet Connection I217-LM
  

Issue Details:

• The onboard adapter was working fine until recently when I encountered the "Code 10" error and there is no internet connection at all.
  
• I've tried updating drivers, uninstalling and reinstalling the adapter in safe mode , checking for BIOS updates, and performing network troubleshooters, but the problem persists.
  
• I've tested the adapter in Safe Mode with Networking, didn't work at all , and of course the "Code 10" error still occurs in normal mode.
  
• The adapter's LED lights are slightly blinking, suggesting some level of activity.
  
• I've also tried using the Intel Ethernet Flash Firmware Utility (BootUtil) to diagnose and update the firmware, but I'm encountering difficulties initializing the adapter.
  

Specific Troubleshooting Steps Taken:

• Driver updates: I've downloaded and installed the latest drivers from both the Intel website and my computer manufacturer's website.
  
• BIOS/UEFI settings: I've checked and reset BIOS/UEFI settings related to the onboard adapter.
  
• Safe Mode: I've tested the adapter in Safe Mode with Networking, where it partially works.
  
• BootUtil: I've attempted to use BootUtil to diagnose and update the firmware, but I'm encountering issues initializing the adapter.
  
• I'm reaching out to the community for any additional insights, suggestions, or possible solutions to this "Code 10" issue. If anyone has experienced a similar problem or has expertise in troubleshooting network adapters, your guidance would be greatly appreciated.
  

Thank you in advance for your assistance.

Best regards, [Ahmed]

 

SCCM 1602: W10 Driver import fails

Hello folks,

I'm currently struggling with an Windows 10 installation.

Actually

the installation task sequence is running smoothly but some drivers are

missing. I already identified the drivers, but I can not import them

into SCCM.

Error from the DriverCatalog.log:

Initializing

driver digest from '<UNC-Path>\Intel(R) Ethernet Connection I217-LM-w10\e1r65x64.inf' DriverCatalog 03.06.2016 10:57:32 1484 (0x05CC)

<UNC-Path>\Zx0C\Intel(R) Ethernet Connection I217-LM-w10\e1r65x64.inf is not applicable to any supported platforms. DriverCatalog 03.06.2016 10:57:32 1484 (0x05CC)

Driver is not applicable to any supported platforms. Code 0x80070661 DriverCatalog 03.06.2016 10:57:32 1484 (0x05CC)

Failed to import a driver using INF file '<UNC-Path>\Intel(R) Ethernet Connection I217-LM-w10\e1r65x64.inf'. DriverCatalog 03.06.2016 10:57:32 1484 (0x05CC)

Does anyone have a hint what to do here ?

SCCM Version is 1602 (5.00.8355.1000)

 

Error on primary Win10 Wifi Network Adaper: (Code 10) {Operation Failed} The requested operation was unsuccessful.

I am using a SurfaceBook and I am getting this error on my primary windows 10 wifi network adapter (marvell avastar wireless-ac network driver):

This device cannot start. (Code 10)

{Operation Failed}

The requested operation was unsuccessful.

This is preventing me from connecting to wifi in any way, since the driver is busted. I have tried most of the troubleshooting steps found online... namely:

• uninstalling driver and restarting
• installing driver directly from manufacturer website
• restoring windows
• updating windows
• resetting network setting
• reset entire windows image

and none of them seem to help. Can anyone help me?? right now my laptop can't connect to internet at all without an ethernet