Windows 10: Internal SATA SSD isn't recognised

Hello,


I wanted to upgrade my PC from Windows 8.1 to Windows 10, but kept getting an error. In the process of trying to upgrade, I somehow managed to get my PC to stop recognising one of the secondary hard drives, internally connected to the PC.


The only thins that I could've done to cause this were:


1 I ran the command DISM.exe /Online /Cleanup-Image /Restorehealth


2 I installed a new Graphics Driver as part of a set of drivers from NVIDIA.


Both of these were recommended by this page:

https://support.microsoft.com/en-gb/help/10587/windows-10-get-help-with-upgrade-installation-errors


My system has successfully been upgraded to Windows 10, if that helps.


If anyone could help me that would be great! Thanks!

:)

 

SATA HDD recognised as SSD

Hi. My SATA HDD is recognised as a SSD and Windows 10 will not perform defragmentation on it as a result; which I appreciate. I've tried many of the prescribed procedures mentioned on forums but to no effect. I'm pretty convinced that the problem lies
in the fact I have installed a SSD in my machine. Windows is recognising the correct size of my SATA HDD however and the SSD isn't showing up quite rightly as its Linux formatted. Using a third party defragmentation program exactly the same problem occurs,
however I was able to defragment my C drive using it as it just warned against it and didn't prohibit me. Any suggestions would be greatly appreciated.

 

SATA HDD recognised as SSD

Just occurred to me. Could it be that the primary boot drive is the Linux SSD. I've got a feeling this could

be the problem. I'm not sure how to configure Windows 10 to boot from the SATA HDD. I will try reinstalling the drivers and look into the BIOS but would appreciate your take on my suggestion.

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.