Windows 10: Internal SSD causing issues

I recently installed windows on a different ssd from my old one. When I would take the Old SSD out, windows 10 would not boot. I connected it back via a USB cable and it works now but if I unplug it, It freezes until I plug it back in. When I plug it back in, It gives me a Windows to Go error. I even check in File Explorer and it says that Windows is on the new drive.

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

SSD Crucial Bx 100 - rattling/vibrating. Possible?

This has been suggested several times already, and it has been suggested you try to move the SSD, remove it, or even suspend it in your case. Will you please try one of these?

If you don't understand vibration and resonance, please refer to @dorsetknob 's post above. *Smile It has been explained that something else moving/vibrating (even if you don't think they're vibrating they are...), fans, hard disk drives, and anything with a motor will cause some form of vibration at certain frequencies. This can be transfered through your case's chassis and where you mounted your SSD could be reaching a certain frequency that causes it to slightly move and rattle against the case.

We are suggesting you take action and report back..you keep asking questions from step 1...we should be on step 4 by now...that is solution.

Try what has been suggested and report back please. Otherwise all you're doing is leading this thread in an endless circle and the help will stop shortly thereafter.

*Toast :toast:

 

Agonizing issues with SSD

Sounds like typical Sandforce hot-plugging BSOD issue.

What SSD are you using exactly ?
Is it in PC you've got listed in specs ?

Cheers,