Windows 10: Internet Connection error but Network Rest won’t fix

I get a code saying “The IntelR Wi-Fi 6 AX201 160MHz adapter is experiencing driver- or hardware-related problems” and the problem code is “0000002b” I have tried enabling the driver and resetting the network but no luck. How can I fix this?Networks show up momentarily after restarting but shortly disappear after

:)

 

network connections error 615. specified port was not found

Hi Karlo,

The error 615 may arise if there's an issue on how your modem is mounted. To sort your concern, we suggest that you consider the following:

• Ensure that your modem is connected properly.
• Run the internet connection troubleshooter. To do this follow these steps:
  • Type Troubleshooting in the search box.
  • Press Enter.
  • Click View All and select Internet Connections.
  • Follow the on-screen instructions.
• Reinstall your modem. For a step-by-step guide, refer to the support website of your Internet service provider.
• If the issue persists, follow the troubleshooting steps provided on this
  link on how to fix network connection issues.

Let us know should you need further assistance.

 

Set Broadband Internet Connection Network Configuration

Hi,

Upon analyzing the details you have provided, kindly run the
Network and Internet Troubleshooter
and check if there's any changes. To run the
troubleshooter,
follow these steps:

• 
  On the search bar, type
  Troubleshooting.
  
• 
  Choose
  Network and Internet.
  
• 
  Run the following
  Troubleshooter:
  
  • 
    Internet Connections.
    
  • 
    Network Adapter.
    
  • 
    Incoming Connections.
    

If the issue persists, we suggest that you try to
renew
your
IP address. To do this, follow these steps:

• 
  Open
  Command Prompt
  as
  Administrator.
  
• 
  Type the following command:
  
  • 
    Ipconfig/release
    and hit
    Enter.
    
  • 
    Ipconfig/renew
    and hit
    Enter.
    
  • 
    Exit.
    

Let us know how it goes.

Regards.

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank