Windows 10: IP Cameras (Network Problem)

I'm looking for someone who knows about CCTV cameras and the correct way of hooking them up (networking (setting ports right) and then port forwarding. If you are this person, please send me an email.
Thanks

:)

 

IP cameras as Spambots

Pretty much all IP cameras are password protected now, since this type of thing came out years ago, and lists of open cams circulated the net.

 

IP camera issue with wireless Access Point

well I connected the second router as you said, indeed it stayed on the same subnet, but wouldn't give ip address to the camera, not in router or in AP mode.
However, I managed to solve the problem even with 2 subnets.
On the primary router, I port forwaded port 80 to the ip address of the secondary router.
On the secondary router, I port forwaded port 80 to the ip address of the ip camera.

Now I can access the ip camera from the mobile app AND from any pc/browser externally.

solved, thanks for the suggestions

 

Problem with ip camera connecting over access point

I had just as much trouble getting my wireless IP cameras working :/

If you havent given up yet, first start with the basics and just have one access point connected will all security disabled and see if you can get the camera connected.
If it connects then see if you can have your router reserve an IP address for the camera so the DCHP will always assign it the same IP address. If you cant then setup a static IP address for the camera. Next reboot everything on your network and see if the camera reconnects and is working. Then re enable wifi security and configure the camera and confirm that the camera reconnects and works after rebooting everything on the network. If it works then add your 2nd access point to the mix and verify the camera is works.