Windows 10: IRQ_NOT_LESS_OR_EQUAL Showing even after clean format

Hello guys, so I bought a new gaming laptop back in April of this year ASUS Rog Strix G17 and it worked really good until last 1-2 months. I keep on getting this IRQ_NOT_LESS_OR_EQUAL crash. At first I started searching online and I nearly tried everything but it kept on crashing randomly sometimes it took days, sometimes 3-4 crashes per day, so I decided to do a clean format. After I did the format, for about a month I didn't have any crash but it didn't last long because since yesterday my pc crashed like 3 times. It passed every test there is, I think that my hardware is OK I guess, a

:)

 

Installing XP : IRQ_NOT_LESS_OR_EQUAL

Hello, i am building a new computer, and while formatting windows, it gets a BSOD : IRQ_NOT_LESS_OR_EQUAL.

• i have tried multiple sticks of ram, one being generic, one being A-Data
• i have tried multiple hard drives
• i have tried multiple power supplies
• i have tried more than one windows cd

Can a faulty mobo/cpu cause this?

This is the computer specs :

• Sempron 3000+ (s754, comes included with the motherboard)
• ECS 791GX
• 2x1GB DDR400

At the same time, i have built two other computers with the same setup, i just cannot figure this one out.

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Cannot Format HD


Need to initialize it as GPT disk type with HD > 2TB:
From Admin command prompt:

1. diskpart
2. list disk =====> Take a note of disk # for the 4TB HD
3. select disk # ====> From step 2
4. clean
5. exit

Open Disk Management and initialize the disk as GPT, create simple then format.