Windows 10: Is a dirty bit on a ssd considered dangerous or it won't affect it?

Discus and support Is a dirty bit on a ssd considered dangerous or it won't affect it? in Windows 10 Ask Insider to solve the problem; I have a ssd and yesterday it got a dirty bit but I'm curious if it's dangerous and it will harm it or no submitted by /u/Zeyadtarek952 [link]... Discussion in 'Windows 10 Ask Insider' started by /u/Zeyadtarek952, Jul 31, 2020.

  1. /U/ZEYADTAREK952
    /u/Zeyadtarek952 Win User

    Is a dirty bit on a ssd considered dangerous or it won't affect it?


    I have a ssd and yesterday it got a dirty bit but I'm curious if it's dangerous and it will harm it or no

    submitted by /u/Zeyadtarek952
    [link] [comments]

    :)
     
    /u/Zeyadtarek952, Jul 31, 2020
    #1
  2. ROLANDO_774
    RolandO_774 Win User

    Dirty Bit not same state on the two possible Command Prompts

    Using Windows 10. When I enter Command Prompt with holding down shift key when restarting and using fsutil dirty query c: , the Dirty Bit state is 0 or off. When I enter Command Prompt (Admin) from running the Windows program and using fsutil
    dirty query c:     , the Dirty Bit is 1 or on. I think the latter condition is why I always get the Disk Check running notification when booting up. I've tried everything to clear the latter mentioned Dirty Bit state but nothing works. I saw one suggestion
    to use a hex editor and actually go into the Bios? to put the Dirty Bit state back to 0, but don't feel comfortable with that. The disk check using
    dskchk c: /f /r in the first mentioned Command Prompt shows the disk has no problems. Why are the Dirty Bit settings different? Could this be why Macruim does not want to clone the disk?

    Thanks for any help and comments.
     
    RolandO_774, Jul 31, 2020
    #2
  3. HAIRYFOOL
    HairyFool Win User
    Windows 10 SSD Boot and Sleep faliure

    Windows cannot stop the BIOS recognising the SSD. If at any time you can go into the BIOS and the SSD is not listed then you have an (intermittent) hardware fault. It does not matter what the precursor steps are if the hardware was OK it must be listed

    Step 6 is categorical, you have a hardware fault. BIOS device recognition is always before drivers load so they cannot affect the process
     
    HairyFool, Jul 31, 2020
    #3
  4. RAMZI M
    Ramzi M Win User

    Is a dirty bit on a ssd considered dangerous or it won't affect it?

    "dangerous file type" attachment

    Hi ,

    I'm Ramzi, independent Advisor, here to help you.

    "dangerous file type" attachments are some files that the Antivirus consider as dangerous.

    The antivirus can alert you that the file is dangerous if it's not! For exemple, .pdf files are considered as dangerous. Any unknown file's type are considered as dengerous. The .Zip files too.

    If you trust the sender then you can accept the file.

    Thank you.
     
    Ramzi M, Jul 31, 2020
    #4
Thema:

Is a dirty bit on a ssd considered dangerous or it won't affect it?

Loading...

  1. Is a dirty bit on a ssd considered dangerous or it won't affect it? - Similar Threads - dirty bit ssd

  2. Clear Dirty Bit

    in Windows 10 Gaming
    Clear Dirty Bit: While trying to troubleshoot something in my system, someone suggested setting the dirty bit on C: However, even though the chkdsk utility starts and "seems" to run at startup, the dirty bit is not getting cleared and the chkdsk utility tries to run every time I start...

  3. Clear Dirty Bit

    in Windows 10 Software and Apps
    Clear Dirty Bit: While trying to troubleshoot something in my system, someone suggested setting the dirty bit on C: However, even though the chkdsk utility starts and "seems" to run at startup, the dirty bit is not getting cleared and the chkdsk utility tries to run every time I start...

  4. Not able to unset Dirty Bit in Windows boot drive

    in Windows 10 Gaming
    Not able to unset Dirty Bit in Windows boot drive: Hello, I have Windows 11 Home Single Language OS installed on my laptop. Now, when I go to Defragment and Optimize Drives tool, I am unable to Optimize my C: drive. It shows that Optimization not available. Also every time I boot up my System, it tries to repair the Drive but...

  5. Not able to unset Dirty Bit in Windows boot drive

    in Windows 10 Software and Apps
    Not able to unset Dirty Bit in Windows boot drive: Hello, I have Windows 11 Home Single Language OS installed on my laptop. Now, when I go to Defragment and Optimize Drives tool, I am unable to Optimize my C: drive. It shows that Optimization not available. Also every time I boot up my System, it tries to repair the Drive but...

  6. File system always gets dirty bit on at startup after migrating from one SSD to other

    in Windows 10 BSOD Crashes and Debugging
    File system always gets dirty bit on at startup after migrating from one SSD to other: Hi,I upgraded my system SSD from a 128Gb to a 500gb needed the space. It went pretty well, but since that I have the problems at boot time. The system always wants to check the file system. If I let it, it finishes, then reboots and starts the self diagnosis and repair...

  7. Dirty bit not resetting

    in Windows 10 BSOD Crashes and Debugging
    Dirty bit not resetting: I tried numerous methods to fix the issue. It happened after the second-latest update which my windows 10 had. I ran the fsutil it told me my C: is dirty but when I ran chkdsk with no parameters, It told me I had zero bad sectors and I dont need to do anything. What do I do...

  8. c: drive dirty bit error

    in Windows 10 Ask Insider
    c: drive dirty bit error: Hello, on every boots my computer checks my c: drive and tries to repair it. I have figured out why it is doing this, it is because it has dirty bit. I have already tried booting from a USB drive and using the command "chkdsk c: /f" This unfortuntely does not work. It does...

  9. Dirty Bit Not Resetting

    in Windows 10 BSOD Crashes and Debugging
    Dirty Bit Not Resetting: Hi, I have recently noticed that every time I boot my PC it runs CHKDSK during startup. I did some research into this and I believe the cause for this is because the dirty bit is set. I checked the dirty bit status with fsutil dirty query for both my drives C and D and both...

  10. How to Remove Dirty Bit from Drive with Windows Installed on It

    in Windows 10 Ask Insider
    How to Remove Dirty Bit from Drive with Windows Installed on It: About a week and a half ago, my PC started scanning and repairing the C drive (which has windows installed on it) every time I would boot the computer. It never shows a percentage. It just shows "Scanning and repairing drive C..." and then after a few seconds it boots up...