Windows 10: Is it allowed to simply pull out the USB stick or something like that nowadays?

Hello have read on ne page that it since 1809 now you can pull out without this *USB Was pulled out or similar kp as it is called in real *

Anyway, are you asking me to?

https://www.chip.de/news/Windows-10...-jetzt-einfach-entfernt-werden_165918399.html

See link must copy it

Report from 13.4.2019

MFG Marc

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

USB stick previously used as a boot stick for Killdisk not recognized

Try method 2 under Windows 7 8 10 here:
Free to Remove Readonly Attribute in Windows

Method 2: Clear readonly status with Diskpart

In Windows 10, 8, 7 OS, you are also able to run Diskpart in Command Prompt to clear read-only attribute on any partition on your computer. You can follow the tutorial below:

Step 1. Open Command Line and type Diskpart
Step 2. Type list disk
Step 3. Type select disk (disk number)
Step 4. Type attributes disk clear readonly





Then try Clean

 

USB Device (USB Stick) Not Recognised by Windows 10

Hello auggy! I did what you suggested. I have found greyed-out "USB Mass Storage Device" entry corresponded to not working USB Stick, uninstalled it, plugged back the Stick but unfortunately story is the same (see the snipping below). USB Stick is still
not working. Any new suggestions?

Actually this not working USB Stick is not a big deal, I can use thousands of other USB Sticks instead. But I would really like to find out, why this particular Stick is not working. What is causing that this Stick is not recognised. Actually the whole series
of USB Sticks (JetFlash 700/730 - 8GB, 16GB, 32GB, 64GB) is not recognised on my computer, because they are all using the same driver. It would be the best to manually re-install driver for this particular USB Stick series (delete the old one's remains, install
the new one), but manufacturer does not offer drivers at his download page.