Windows 10: is it possible to duplicate audio devices?

Hello,


is it possible to duplicate a certain audio device? I want to duplicate my FiiO Dac https://imgur.com/a/l4Asqyd so i have two devices. Why? For recording purposes i want my normal desktop audio on FiiO device 1, teamspeak on FiiO device 2, both should send their data to the FiiO so i can still hear both things but recording programs can destinguish between one "device" dedicated for desktop audio/ingame audio and one for teamspeak, discord, music, whatever i choose to let run on the second "device".

what i think it would look like https://imgur.com/a/kuLR5zC

if there are easier ways to do this, please go ahead. thanks in advance

:)

 

Audio Device

Hi Mohammed,

No Audio Output Device can be cause by outdated sound drivers or corrupted sound drivers.

For us to provide the best resolution possible, we suggest following the steps below:

• Run the troubleshooter on this link.
• If the issue still persists after running the troubleshooter, click on the
  dropdown arrow and follow the steps on the article.
  
  

Don't hesitate to inform us on how it goes.

 

Re-enable audio device

Hi,

I would be happy to assist you.

Before we proceed with troubleshooting, I would need little information on the issue.

• Are using speakers / head phones to listen to audio?

If you have disabled the audio device, then you might not see it under the list of playback devices. I would suggest you to follow these steps to make sure you see the disabled devices:

• • 
    Open
    Control panel.
    
  • 
    Click Hardware and Sound and then Click on
    Sounds.
    
  • 
    Under Playback tab, right click on the empty area and make sure
    “Show Disabled Devices” has a check mark on it. If headphones/Speakers are disabled, it will now show up in the list.
    
  • 
    Right click on the device and
    Enable it. Click OK.
    

If the issue still persists, try enabling speakers automatically using steps below.

• 
  Go to Settings> Click on themes> Advance sound settings> right click on the speakers or the audio device youo have connected > click on
  Configure device.
  
• 
  Test the sound level you want, click Next.
  
• 
  And configure the audio devices.
  

Hope this helps you. Do reply if you need further assistance on Windows 10.

Thank you.

 

Problem with audio devices

Hi Marcello,

I appreciate you for trying some steps in order to get the issue resolved.

If you're connecting to an audio device using USB or HDMI, you might need to set that device as the default.

Open Start, enter Sound, select it from the list of results, and then, on the
Playback tab, select a device, then Set Default.

I would also suggest you to turn off Audio enhancements.

• 
  Go to Start, enter Sound, and select Sound Control Panel
  from the list of results.
  
• 
  On the Playback tab, right-click (or tap and hold) the
  Default Device and select Properties.
  
• 
  On the Enhancements tab, select the Disable all enhancements
  check box and try to play your audio device.
  
• 
  If that doesn't work, select Cancel and, on the Playback
  tab, select another default device (if you have one), select the Disable all enhancements check box, and try to play audio again. Do this for each default device.
  

Please revert if you face any issues with Audio.

Thank you.