Windows 10: Is there anybody here that understands why a simple home network

Is there anybody here that understands why a simple home network will not work in Windows 10, with Windows 7 I had no problems all my computers could see each other AND themselves? All can access the internet with Edge, Internet Explorer, Google Chrome, etc.

:)

 

Help needed with simple wired network

Step one- Connect all PC's to router, and then the router to the modem. PC's go to router by the ports labeled "1-4" on the back of the router. WAN port goes to router. Power up all network equipment, and then systems.
Step two- Power on the computer connected to port one. Go into router settings at 192.168.0.1 and configure internet, dyndns, firewall, etc.
Step three- Go to "network set up wizard" in windows. (Network places- network set up wizard). The rest is self explanatory.
Step four- right click on each drive and printer you want to share, and then configure sharing preferences. Should be easy enough.
Step five- right click my computer, and the select "map network drive". Using the network address for each piece of hardware you shared, assign network drive letters.

Congratulations, you have a fully operational network. Happy Gaming! *Toast :toast:

 

Help needed with simple wired network

Perfecto!!!! *Smile

 

Unable to access HP Simple Pass to Sign-in to the computer on Windows 10

Hi Jerome,

Thank you for posting in Microsoft Community and being a part of Windows 10.

I understand your concern about accessing HP simple pass after upgrading to Windows 10. We will help you with this issue.

• Do let us know the make and model of your computer?
• Have you installed HP simple pass software on your computer?

Try the below steps and check if it helps.

Step 1: I suggest you to download the latest HP Simple Pass software from the manufacturer's website install it and check if it helps.

Step 2: If you have already installed the software, I suggest you to re-install it and check if the issue persists.

Follow the steps to Access Recovery Manager:

• Press Start button from the keyboard, type Recover Manager.
• Select Recovery Manager from the list when it becomes available. Allow the action to continue, if prompted. The
  HP Recovery Manager opens.
• Click Software program re-installation, Next , select
  HP SimplePass for the listing and then follow the on-screen instructions to reinstall application
  

Hope it helps. Try the above and get back to us with an updated status of this issue for further assistance.