Windows 10: Is there no Deployment Image for the new xx450 version? It's stuck on xx329

submitted by /u/CptBrian
[link] [comments]

:)

 

Customised Windows 10 deployment on multiple desktops and laptops.

OK, after giving this a thought and thinking how I would do it, here's my suggestion. Please notice that, as I said, this is how I would do it. Other geeks might disagree with parts or all of it.

I tested this scenario using one Hyper-V VM as technician machine (the one to build image) and three virtual machines to test simultaneous deployment in two scenarios:

• Capturing install.wim from technician machine and using DISM to apply / deploy image from a network share
• Capturing install.wim from technician machine, making ISO from it, deploying by clean installing from ISO burned to Flash drive

Based on the fact that ISO method is clearly faster and simpler, it is what I suggest to you. I estimate you would need an hour and half to two hours to customize install image, capture it and make an ISO, then assuming you would make 5 Flash drives for install / deployment you would need about half an hour per five machines, in other words you would deploy to those 25 new machines in less than three hours, almost a full working day to deploy those 50 existing ones.

Two working days, day 1 to make the image and deploy to new machines, day 2 to deploy to old ones.

Chronological workflow based on my suggestion:

Phase 1, Image customization tutorial, parts One through Six:

• Install Windows 10 on a technician machine (I recommend Hyper-V VM but any capable PC is OK)
• Boot to Audit Mode
• Update Windows, install software, customize & personalize Windows
• Sysprep

Phase 2:

• Capture the install.wim from technician machine as told in this tutorial, Part Four steps 4.1 through 4.5 (physical PC as technician machine) or Part Four steps 4.6 through 4.13 (Hyper-V VM as technician machine)
• Create ISO as told in same tutorial, Part Five
• Burn / write ISO to as many Flash drives as you want to / need to for simultaneous installs
• Boot production machines from Flash drive, install Windows 10

The above is how I would do this. If you choose the DISM method instead, applying install.wim from a network share, see this Microsoft support article: https://technet.microsoft.com/en-us/.../hh824910.aspx

For more advanced deployment using MDT see this article: https://technet.microsoft.com/en-us/.../dn475741.aspx

 

Restoring Windows 10 Image using Macrium Reflect


In addition to the above. Here's my suggestion in step by step.
I assume you have Macrium Installed in your current HD and already made a backup copy.

1. Connect your new HD via USB port and boot up.
2. Run Macrium, click on Restore tab then select the Backup Image that you made to restore
3. click on "select a different target disk" then select your new HD as destination
   
   
   
4. Proceed to restore then Shutdown and disconnect the old HD and replace with the new HD
5. Boot up with your new HD.

 

[HELP]Image recovery issues

Guys i am trying to fix my cousins Asus Eee netbook. It has a backup image file that is partitioned on the hard drive but when I go to use it the app will run through a few steps and stop. It is running Vista . Any suggestions?