Windows 10: issue with installing Windows10 stuck at logo with no dots spinning

hey, i’ve built a new pc and now it’s time to install windows 10 to it,even though there are many ways to install windows 10 to a new pc and i went with clone file system from old pc,but i’ve an pretty frustrating issue with a new SSD drive that i preformed successful clone file system to it from an old HDD that has working system file on it the issue is “windows stuck at logo for ever” no dots spinning, not any massages only logo

I’ve tried turning pc off and on 3 times to activate recovery mood but it also bring me back to the endless logo waiting

So i went to change the installation method and i went with 16gb flash drive, i used windows media tool, also this one has the same issue occurred yes I unplugged the SSD before starting the flash drive method.(i do set the boot order on all cases)

I even tried to lunch windows with my old HDD + SSD plugged in at the same time then HDD alone. Same issue (yes i went to BIOS

i finally ran out of solutions and i’m seeking for your help guys

Pc spec: Asrock b550 pro4 AMD ryzen 5 5600x 2x8 16gb 3200 ddr4 ram MSI Rtx 3070 500gb m.2 1tb SSD 750w psu

submitted by /u/Electronic_Stage2584
[link] [comments]

:)

 

Windows 10 installation stuck at blue logo(no spinning dots)


All,

I downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)

My system config is below
Intel i5(4th gen)
Gigabyte H87 D3H(which has UEFI) and flashed to version 9
Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10)
8GB RAM
SSD(60 GB, which has corrupted win 7)
HDD(500 GB)

Believe I have the minimum system requirement to install Windows 10?
After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX). But even then it doesnt move forward from the windows logo screen.
Please someone suggest, how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.
I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
Note:I havent used media creation tool here


To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg

Any help is appreciated to move this forward.

Thanks
Guhan

 

Windows 10 stuck at Black Screen with Blue Windows Logo no spinning dots

Windows 10 stuck at Black Screen with Blue Windows Logo no spinning dots

 

windows 10 install stuck on windows logo/spinning dots

I just bought computer parts and after start to install windows, it stuck on the windows logo after that spinning dots Rotated about two times.

I changed my DVD three times and even tried windows 8 and 7 and USB installation.

I had four ram and tried them one by one

I unplugged all of the parts and only connect motherboard, CPU, ram, and weird keyboard to see if it goes to the next step and ask for the HDD.

Also, it's on UFEI mode.

Motherboard: gigabyte h370 aorus gaming 3 wifi

CPU: i7 9700k

Ram: G.skill and corsair

I will appreciate if someone can help me with that.