Windows 10: Issues with Booting after Formatting

Hello,

After having booting issues on my Samsung Series 7 All-in-one (i7). I decided to clean reinstall Windows 10. After installing, I am having issues with booting windows 10 and I am left with:

The Boot Configuration Data file doesnt contain valid information for an operating system

File: \BCD
Error:0xc0000098

I tried to enter recovery environment by pressing F1 but it didnt lead me to where the command prompt is.

So I entered the bios, and went to boot and changed my booting to CSM OS and restarted the computer.

This led me to the startup purple screen where you download Windows 10. I clicked repair this computer and it finally led me to the recovery environment (note: it was significantly slower when loading).

Now, after copying youtube tutorials on how to fix bootrec/ fixboot access denied and repair windows boot partition I am lost and this is what shows when I list vol and list partition on diskpart:

Volume 0 E DVD-Rom 0B No Media
Volume 1 V NTFS Partition. 930 GB Healthy
Volume 2 H RAW. Partition. 499 MB Healthy
Volume 3. G. FAT32. Partition. 100 MB


Partition 1. System. 100 MB. 1024KB
Partition 2. Reserved. 16MB. 101 MB
Partition 3. Primary. 930 GB. 117 MB
Partition 4. Recovery. 499MB. 931 GB


Any advice is greatly appreciated.

Thank you

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Formatting a dual boot system with windows 10 and ubuntu

Hi,

In Windows 10, you can easily format a hard drive or a partition by accessing Computer Management. For us to assist you, we suggest that you follow the steps listed below:

• Press the Start button.
• Type Computer Management.
• On the left side, click on Disk Management under Storage.
• Locate the drive that you want to format.
• Once located, right-click on the drive and choose Format.

If the hard drive has not been formatted with the steps that we have provided above, we recommend that you contact the manufacturer of your hard drive. Some hard drive requires a software that you'll need to use just to format it.

Let us know how it goes and if you need further assistance, feel free to post back.