Windows 10: It feels like the os has been formatted

My pc quitted to load now its in recovery mode and I have a sd card slot can you help pls? Error code: 0xc000000f and nothing works. And when afk it shuts down!

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

My 256gb sd card isn't being recognized as 256gb when formatting

Hi James,

Thank you for posting your query in Microsoft Community. Appreciate your interest in using Windows 10.

To assist you better, I would like to ask how you are trying to format the SD card.

I suggest you to format and check for if the issue persists in Disk Management by following the steps below:

• Right click on Start icon and select Disk Management.
• Right click on the drive for SD card and select Format.

Hope the information is helpful. Feel free to
write to us for any other assistance with Windows, we’ll be glad to assist you.

 

Formatting a dual boot system with windows 10 and ubuntu

Hi,

In Windows 10, you can easily format a hard drive or a partition by accessing Computer Management. For us to assist you, we suggest that you follow the steps listed below:

• Press the Start button.
• Type Computer Management.
• On the left side, click on Disk Management under Storage.
• Locate the drive that you want to format.
• Once located, right-click on the drive and choose Format.

If the hard drive has not been formatted with the steps that we have provided above, we recommend that you contact the manufacturer of your hard drive. Some hard drive requires a software that you'll need to use just to format it.

Let us know how it goes and if you need further assistance, feel free to post back.