Windows 10: I've been getting a lot of network related BSoD's

So, these past 3 months I've been experiencing alot of BSoDs. I thought my ssd was dying, but it was barely had like 2 years of usage, and I know my ssd has a long expected lifetime. But then I started to notice more and more BSoDs, and it has been a pain for learning. I downloaded that bluescreenview app thing, and what I see is alot of network related BSoDs, such as tcpip.sys, NETIO.sys most recent, nwifi.sys, and with the exception of ntoskrnl. The BSoDs generally happens in the middle of a Teams meeting or just strolling around YouTube. There was that one time where I was fiddling with

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Did our Epson printer get hacked?

Another question, is this on a home network or a work network? The steps @eidairaman1 listed are always a good first step. If this is on a work network you manage, I'd be much more concerned than the home one. It is possible someone is screwing with you, but malware could also be the culprit.

 

Previously getting network adapter related BSODs, new one has occured

I've getting getting the following BSODs infrequently: WHEA_UNCORRECTABLE_ERROR and CLOCK_WATCHDOG_TIMEOUT, both of which are related to CPU crashes unless I'm mistaken. I'm just wondering about some steps to take that might help this out.

BSODInfo – Google Drive