Windows 10: Just build this new PC and my wifi isn't searching for other networks and in device manager...

*** Email address is removed for privacy ***

:)

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.

 

Creators Build WiFi connection

Hi,

Since you've installed the Windows 10 Creators update, you should also update the WiFi adapter to resolve the issue. You may check for the latest driver of your WiFi adapter through Device Manager. To do so, please follow the steps below:

• Press Windows key + X, then select Device Manager.
  
• Under Device Manager, double-click Network adapters.
  
• Right-click on your wireless adapter, then click Properties.
  
• Under Properties, click Driver tab.
• Click Uninstall.
• Once you're done, click OK.
• Left-click on the wireless adapter to highlight it.
• Click Scan for hardware changes to search for the most updated driver for the device.

Feel free to post back with the result for further assistance.

 

Network will not show on the last device.

Hi James,

I suggest you to remove all the networks that are connected to your device and check.

If the issue persist, I suggest you to follow the steps below.

An outdated or incompatible network adapter driver can cause connection problems. If you recently upgraded to
Windows 10, it's possible that the current driver was designed for a previous version of Windows. Check to see if an updated driver is available.

• 
  In the search box on the taskbar, type Device Manager, and then select
  Device Manager from the list of results.
  
• 
  In Device Manager, select Network adapters > the network adapter name.
  
• 
  Right-click (or press and hold) the network adapter, and then select Update Driver Software >
  Search automatically for updated driver software. Follow the steps, then select
  Close.
  
• 
  After installing the updated driver, select the Start
  
  button >
  Power > Restart if asked to restart, and see if that fixes the connection issue.
  

If Windows can’t find a new driver for your network adapter, visit the PC manufacturer’s website and download the latest network adapter driver from there. If your PC can't connect to the Internet, you'll need to download a driver on a different PC and save
it to a USB flash drive, so you can install the driver on your PC. You’ll need to know the PC manufacturer and model name or number.

Rely us with the status to assist you further.

Regards,

Guru Kiran