Windows 10: Keep getting a blue screen with WHEA Error code and system will not restart, says...

Keep getting a blue screen with WHEA Error code and system will not restart, says uncorrectable error, what can I do ?

:)

 

Blue screen with stop code WHEA UNCORRECTABLE ERRORS.

My laptop keeps freezing randomly and blue screen with stop code WHEA UNCORRECTABLE ERRORS. I will restart after collecting information 100%. Anyone knows how to fixed this problem?

 

Blue screen whea uncorectable error

All I can suggest is that you start the diagnostic tests for hardware errors.



STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE [/i] CPU TEST
*Arrow Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums



Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.




THREE [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

 

BLUE SCREEN STOP CODE WHEA

Hi DaveM121 - I followed all steps per the letter. Once I have accessed the ability to load to my usb drive, I have tried to launch from the drive under the UEFI Boot and then after failure of launch, tried the legacy USB storage boot and each time either
way the device just loops from the blue screen WHEA error to the dell icon login window and back to blue screen, then to a dell window, "preparing automatic repair" then cycles to the WHEA error again, then back to the dell screen login and so on.