Windows 10: keep getting ntkrnlmp.exe BSOD

Hello, i keep getting BSOD problem because of ntkrnlmp.exe the bsod happen randomly on low or high cpu& gpu load. everytime i check my dump file it keep telling ntkrnlmp.exe is the problemthe problem consist but not limited to:KMODE_EXCEPTION_NOT_HANDLED 1eATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY fcIRQL_NOT_LESS_OR_EQUALthings i have tried:-using ddu for amd and nvidia graphic driver-sfc /scannow-changing the ram slot testing each ram-using memtest86-full scan for malware-reinstalling window is it driver issue like on the internet says or hardware issue?thank you

:)

 

BSOD UNEXPECTED_KERNEL_MODE_TRAP

Hi, OttOiToto

The problem is caused by (ntkrnlmp.exe)

Check this link, I hope it helps

https://www.thewindowsclub.com/fix-ntkrnlmp-exe...

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised
on the site before you decide to download and install it.

Let us know if these steps help you to resolve the issue.

 

Getting BSOD 139 on a new install of Windows

Hi, thank you for patiently waiting, upon analyzing and checking the DMP files, the error you have is ntkrnlmp.exe, this is usually caused by Damaged power cords and adapters and drivers, and software updates, to fix this issue kindly refer to the steps provided on this link:

https://www.lifewire.com/fix-the-ntkrnlmp-exe-e...

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Additional note: If the issue persists, I suggest contacting a local technician to physically check the device for any hardware-related issues.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.