Windows 10: Keep two internal HD in sync

I have a PC with three storages:- SSD: OS + apps- HD1: data main- HD2: data backupHow can I automatically keep in sync HD2 every time I make a change to HD1?PS: I used to have the two HD into an external RAID box that was taking care of the RAID 1 config of the two HD, but it broke, so I put the two HD inside.PS: I'd rather avoid the ASUS motherboard RAID feature.thx

:)

 

hd6950 to hd 6970

ok
i ve tried everything:with atiflash from dos,winflash.step by step with bios powercolor hd 6970 from the database.
nothing,doesn´t work.any suggestion????

 

Things to do once connected new G-Sync monitor

I'm getting my G-Sync monitor today.

I think I have to take the following steps:

• Connect 1440p G-sync monitor with DP cable
• Connect second 1080p 60Hz monitor by HDMI
• Startup PC
• Reinstall display driver
• Restart PC (I always do that after display driver install)
• Activate G-Sync in NV control panel (I believe also V-Sync is auto on after that?)
• Set my 1440p monitor from 1080p to 1440p
• Calibrate my 1440p monitor

Also ingame, I should turn off V-Sync?
Are there any problems running a second 60Hz 1080p monitor?

Is there anything else I should do/know?

 

Cannot Format HD


Need to initialize it as GPT disk type with HD > 2TB:
From Admin command prompt:

1. diskpart
2. list disk =====> Take a note of disk # for the 4TB HD
3. select disk # ====> From step 2
4. clean
5. exit

Open Disk Management and initialize the disk as GPT, create simple then format.