Windows 10: keeps on getting different codes of BSOD

Hi guys,I'm having bsod every 5 minutes even if I install a fresh OS.Sometimes BSOD triggers even in the boot load.I already tried reseating every components,BIOS updated to the latest version, changed different version of windows 10 OS even win11 still triggers BSOD, tried different frequency of ram, XMP on and off no overclocking doneI collected these dump files, googled them and still no possible fix.I have 3 moth old PC with these specsRyzen 5 5600xcorsair Vengance 32Gb 3600mHzRX6600 swift 21 8gbsamsung 970gb m.2 SSDFSP hydro K 700wI hope you can help me guys I'm desperate nowI attached

:)

 

BSOD with differents error code

hi, im just finished all these steps, but after the restart suddenly my pc is having another BSOD with error code KERNEL_MODE_HEAP_CORRUPTION. This is not the first time it happens, before this, im trying a several guide to fix my BSOD, whenever i finished
it, it seems like my pc having another BSOD with different error code. Here's the new minidump files :

https://drive.google.com/file/d/12XpiqTZne3i3foGhQ7C8gLHeF6IRwoqB/view?usp=sharing

Thanks for ur response

 

Keep getting different BSOD despite everything I try

I keep getting different BSOD, i have updated all my drivers, i have ran SFC, virus scan, and other tests with no results.

the most recent codes that have popped up are

Stop Code: IRQL_NOT_LESS_OR_EQUAL

Stop Code: SYSTEM_SERVICE_EXCEPTION (win32kbase.sys) (accompanied with a loud noise from my speakers)

stop Code: MEMORY_MANAGEMENT (atikmdag.sys)

 

BSOD during gaming, plethora of different error codes!

Hello and welcome to TenForums

The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

Try CHKDSK
using option 3
Then



Diagnostics Test [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.