Windows 10: Keeps running into "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" error every time I boot up my pc...

Hi all, This error has been happening for the past 1-2 day every time I start up my pc at first. After it runs into error, it auto restarts and resolves by itself, but when I start it up the next time, it does the same thing again auto restart then resolves by itself, just rinse repeat. I can still use the pc afterward but it is a bit inconvenient to deal with and takes a lot longer start up.I tried searching online and looked into the minidump file but it is just bunch of gibberish letters and numbers. My partner updated the windows driver and NVidia driver for me yesterday, so both are up

:)

 

Error: "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED." and unable to boot the device running Windows 10

Hi Dito,

As you are unable to access the operating system with SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, do not worry we will help you with this issue.

System Thread Exception Not Handled error in Windows 10 mostly arises due to incompatible or old
graphics card drivers. System Thread Exception Not Handled error is often displayed along with the Blue Screen of Death (BSOD).

As you are unable to boot the device from recovery tool, try the below and check if it helps.

I suggest you to create an installation media tool for Windows 10, change the boot order to boot from the CD/DVD or USB drive and perform an startup repair and check if it helps.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: Try to change the boot order.

Follow the below steps:

• Refer to the device user manual to know the key to enter in to
  Windows Recovery Environment.
• I suggest you to insert the DVD drive, hard restart the computer, and press the key (F2
  for DELL users), once the computer manufacturer logo pops-up.
• Change the Boot sequence to DVD/ USB drive
  under UEFI firmware settings and Restart. (Sequence depends on which external device you are using to boot the device)
• After your PC restarts, select the boot order and change accordingly by following the information available on the BIOS screen.

BIOS Disclaimer:

Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings
can be solved. Modifications of the settings are at your own risk.

After creating the tool perform Startup Repair.

Step 3: After creating installation media and changing the boot order try to perform Startup repair.

I would like to inform that, if your Windows 10 is not able to boot or startup, Startup Repair will come into action and try to diagnose and fix the issue. It will scan system files, registry settings, configuration settings and
more and try to fix the problem on its own, automatically.

Perform the Startup Repair:

• When your computer starts, wait for the manufacturer logo to check the option for boot menu, it will usually be
  F12.
• The boot menu key might differ with each manufacturer. If you are unable to find the boot menu key, you may refer the user manual.
• Restart the computer, when the manufacturer's logo is displayed, keep pressing the
  Boot menu option key to enter the boot menu and change the boot option to
  CD\DVD ROM.
• After you boot your computer using Windows 10 DVD, a black screen appears with gray text "Press any key to boot from CD or DVD". Press any key.
• Select the correct time and Keyboard type.
• Click Repair your computer in the lower left corner
• Click on Troubleshooting, advanced option and then click
  Startup Repair.

Hope it helps. Reply to the post for further assistance on this issue, we will be happy to help you.

Thank you.

 

BSOD: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED + stornvme.sys

Steps provided here should fix the error:
https://pc-mac-help.com/blog/fix-system_thread_exception_not_handled-blue-screen-error-windows-10

 

Run time error 6 overflow

Hello,

Thank you for writing to Microsoft Community Forums.

Please provide some additional information, so that we can assist you better.

1. Could you elaborate how are you trying to run app?

Runtime Error 6 indicates that there is a software or hardware problem. Runtime errors can be caused by conflicts between two or more software programs, memory problems, or if your computer has been infected by malicious
software.

I suggest you to follow the below mentioned step and check if it helps.

Step 1: Booting the computer in a clean boot state can reduce software conflicts and help identify the root cause of the issue. To do this, follow steps from this link
click here.

Note: I would like to inform you that once you select Normal startup under startup selection all the services and startup items will automatically be enabled. You just need to restart the computer to
start the computer normally.

Step 2: Turn Windows Security real-time protection on:

1. Select the Start　button, then select Settings >
   Update & Security > Windows Security > Virus & threat protection.
   
   
2. Do one of the following:
   
   1. In the current version of Windows 10: Under Virus & threat protection settings, select
      Manage settings, and then switch the Real-time protection
      setting to On or Off.
      
   2. In previous versions of Windows 10: Select Virus & threat protection settings, and then switch the
      Real-time protection setting to on.

1. 1. 
      

Hope it helps.

Let us know if you got the help you needed by clicking "Yes or No.

Harish

Microsoft Community – Moderator