Windows 10: Kernel Power - Event ID 41 - Task Category 63 [Hard Hangs + Unexpected Shut Downs and...

My newly built PC hangs randomly about once a month, but its slowly becoming more frequent,Any assistance would be helpful, log events below.--------------- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">- <System> <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{OMITTED}" /> <EventID>41</EventID> <Version>8</Version> <Level>1</Level> <Task>63</Task> <Opcode>0</Opcode> <Keywords>0x8000400000000002</Keywords> <TimeCreated System

:)

 

Event ID 41 Task Category 63

If i get no BSODs, no errors, no events logged in event viewer apart from kernel power 41 (63), not even the windows did not shut down successfully screen (don't know if that is still in windows 10), and the computer just turns off and a few seconds later it turns back on, is it safe to assume that it is the power supply and not the motherboard? Because I have heard that this can be caused by the motherboard. Also when this happens, is it harmful for the rest of the hardware?

 

Kernel-Power event id 41. BugcheckCode 0

Hello,

Thank you for writing to Microsoft Community Forums.

In-order to get more clarity on this issue and to assist you with appropriate troubleshooting steps, reply with answers to the below questions:

1. Are you aware of any changes made on your PC, prior to this issue?
   
2. Is this issue specific while playing a particular game?
   
3. Which edition of Windows are you currently using?
   

A Kernel Power Event 41 can occur in the following scenarios.

Scenario 1: The computer restarts, and there is a Stop error BugcheckCode in the event data.

Scenario 2: The computer is shut down by pressing and holding the power button.

Scenario 3: The system randomly restarts and no Stop error BugcheckCode is listed, or the computer is completely unresponsive (hard hang).

I suggest you refer the article on Kernel
Power Event ID 41 and follow the steps for the scenario that is causing this error on your PC.

Additionally, you can refer the article on Windows
Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" in Windows
and check if that helps.

Regards,

Sandeep Kumar M

Microsoft Community – Moderator

 

Kernel-Power Event ID 41 Task Category 63?

Hi,

Thank you for being part of Microsoft Community.

The kernel power event ID 41 error occurs when the computer is shut down, or it restarts unexpectedly. When a computer that is running Windows starts, a check is performed to determine whether the computer was shut down cleanly. If the computer was not shut
down cleanly, a Kernel Power Event 41 message is generated.

An event 41 is used to report that something unexpected happened that prevented Windows from shutting down correctly. There may be insufficient information to explicitly define what happened. To determine what may have happened and to identify a potential resolution,
it is important to know what the computer was doing at the time just before the event occurred.

If event 41 is logged because power to the computer was interrupted, consider obtaining an uninterruptible power supply (UPS) such as a battery backup power supply. An underpowered or failing power supply may cause this behavior. For example,
if you added RAM or additional devices or hard disks when this problem began, the power supply may cause the problem.

This scenario usually indicates a problem with the hardware. To help isolate the problem, check the following items:

• Overclocking: Disable overclocking to see whether the issue occurs when the system is run at the correct speed.
• Check the memory: Verify the memory by using a memory checker. Verify that each memory chip is the same speed and that it is configured correctly in the system.
• Power supply: Make sure that the power supply has enough wattage to appropriately handle the installed devices. If you added memory, installed a newer processor, installed additional drives, or added external devices, such devices can require
  more energy than the current power supply can provide consistently.
• Overheating: Check whether the system is overheating by examining the internal temperature of the hardware.
• Defaults: Reset the system back to the system defaults to see whether the issues occur when the system is running in its default configuration.
  

Do get back to us for any issues pertaining in the future. We will be happy to help.