Windows 10: KERNEL_DATA_INPAGE_ERROR Bugcheck code : 0x7A0x20, 0xFFFFFFFFC000000E, 0xFFFFAF81D3EEC120, 0x0

well my hdd down bad right now it tends to disappears and when it reapers it crashes my pc did all sorts of checks my c drive ssd is fine i have 50 gb space left out of a 256 gb ssd tried everything and microsoft windows stops to respond , did everything i can i see that i cannot access my d drive hdd it failed a long generic test . My pc starts very slow hangs on booting up but when i plug in the charger it start real fast . my pc crashes randomly even if i do not use d drive while downloading while using ide to code or just watch youtube , i also ran all sorts of scans no viruses

:)

 

BSOD & Bugcheck code: 0xC4 (0x20010, 0xFFFFF800774BE960, 0x0, 0x0)

Hello,

I am having multiple BSODs on my new PC with the following specs:

1. Case corsair graphite series 760t black

2. Motherboard Gigabyte Z97x-Gaming GT (1150/Z97X)

3. PSU CORSAIR RM 650W 80+ GOLD

4. CPU COOLER ZALMAN CNPS5X PERFORMA

5. SSD SAMSUNG 120GB SATA III 850 EVO S21UNSAG137183

6. CPU INTEL CORE i7 4790K (1150/4.0GHZ/8MB)

7. VGA PCI X MSI R9 270X GAMING 2GB

8. RAM DDR3 CORSAIR 8GB (2X4) KIT 1600MHZ Ve

9. HDD WD SATA III 3TB 64MB RED

10. DVD-RW SAMSUNG SH-224DB/BEBE BLACK BULK

11. WINDOWS 8,1 64BIT upgraded later to WINDOWS 10

after research with a program called whocrushed I discovered the following bugcheck code: 0xC4 (0x20010, 0xFFFFF800774BE960, 0x0, 0x0)

Crash dump directory: C:\WINDOWS\Minidump

Crash dumps are enabled on your computer.

On Sun 04/10/2015 11:51:59 GMT your computer crashed

crash dump file: C:\WINDOWS\Minidump\100415-4250-01.dmp

This was probably caused by the following module: verifierext.sys (VerifierExt+0x12602)

Bugcheck code: 0xC4 (0x20010, 0xFFFFF800774BE960, 0x0, 0x0)

Error: DRIVER_VERIFIER_DETECTED_VIOLATION

file path: C:\WINDOWS\system32\drivers\verifierext.sys

product: Microsoft� Windows� Operating System

company: Microsoft Corporation

description: Driver Verifier Extension

Bug check description: This is the general bug check code for fatal errors found by Driver Verifier.

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.

The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

Google query: Microsoft Corporation DRIVER_VERIFIER_DETECTED_VIOLATION

On Sun 04/10/2015 11:51:59 GMT your computer crashed

crash dump file: C:\WINDOWS\memory.dmp

This was probably caused by the following module: avc3.sys (avc3!UcAddUrlEntry+0x31B2F)

Bugcheck code: 0xC4 (0x20010, 0xFFFFF800774BE960, 0x0, 0x0)

Error: DRIVER_VERIFIER_DETECTED_VIOLATION

file path: C:\WINDOWS\system32\drivers\avc3.sys

product: BitDefender AVC

company: BitDefender

description: Active Virus Control filter driver

Bug check description: This is the general bug check code for fatal errors found by Driver Verifier.

This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.

A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: avc3.sys (Active Virus Control filter driver, BitDefender).

Google query: BitDefender DRIVER_VERIFIER_DETECTED_VIOLATION

On Thu 01/10/2015 14:19:55 GMT your computer crashed

crash dump file: C:\WINDOWS\Minidump\100115-5031-01.dmp

This was probably caused by the following module: ntoskrnl.exe (nt+0x14E240)

Bugcheck code: 0x1 (0x7FFADFCD356A, 0x0, 0xFFFF, 0xFFFFD0002141CB80)

Error: APC_INDEX_MISMATCH

file path: C:\WINDOWS\system32\ntoskrnl.exe

product: Microsoft� Windows� Operating System

company: Microsoft Corporation

description: NT Kernel & System

Bug check description: This indicates that there has been a mismatch in the APC state index.

The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Can you help me?

 

BSOD Bugcheck code 0x1E (0xFFFFFFFFC0000005, 0x0, 0x8, 0x0)

I have the dump files. I strongly believe this is a driver problem but idk anymore. I have checked and rechecked hardware and found nothing.

Who Crashed says:

On Tue 7/24/2018 9:26:48 AM your computer crashed or a problem was reported

crash dump file: C:\Windows\MEMORY.DMP

This was probably caused by the following module: ntkrnlmp.exe (nt!RtlAssert+0xEA8)

Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0x0, 0x8, 0x0)

Error: KMODE_EXCEPTION_NOT_HANDLED

Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.

This might be a case of memory corruption. This may be because of a hardware issue such as faulty RAM, overheating (thermal issue) or because of a buggy driver.

The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Here is my crash dump files in a zip. https://drive.google.com/open?id=1Vi-temzFYTGGMHs028aXixmmuRnJsy8k

Thank you in advance for any help.

 

Error code 0x0

Good day! I'm Raniel, an Independent Advisor and a Microsoft user like you.

Can you run through the suggested steps provided by Andre Da Costa and Jose Est on this article with a similar issue that you're experiencing and see if it works for you:

https://answers.microsoft.com/en-us/windows/for...

I hope this helps.