Windows 10: Kilitli dosyalarımı açamıyorum.

Merhaba kısa zaman önce bilgisayarımı sıfırladım ve dosyalarımı harici taşınabilir HDD`ye aktardım fakat dosyaları windows üzerinden şifrelemiştim , şuanda da dosyaları bilgisayarıma atamıyorum , okuyamıyorum kısacası dosya üzerinde hiçbir işlem yapamıyorum , " dosya sahibinden izin almalısınız " diyor bunu nasıl düzeltebilir. Fotoğraflar , videolar , excel dosyaları , hiçbiri açılmıyor.

:)

 

Pentium M

Not sure what I'm looking at. Though when I do go to Options and then CPU it lists my CPU
as Intel Pentium M processor 1.73 GHz, and then under that it lists speed: 799.9 MHz
and then features and cache size.I ran the benchmark test and don't understand all
those numbers, but while testing I checked CPUZ and it still says it is running at 800 MHz.

 

M-Audio M-Track 2x2 Not Recognized by my computer.

Hi,



Thank you for writing to Microsoft Community Forums.



We appreciate the research and troubleshooting you have done, this issue could be from the software end or from the hardware itself.



Please try few of the troubleshooting below to further eliminate the root cause of the issue.

1. Try to connect the device with a different USB and check if that helps.
   
2. Connect the M-track to different computer and check if you still face the issue there, if the issue persists, it could be caused by hardware.
   

Method 1:

1. Press Windows + R key on your keyboard together, and type
   control printers.
   
2. You will see list of all the devices and printers connected to your computer.
   
3. Click on Add a device and follow the onscreen instruction and add your device.
   

Method 2:

1. Uninstall
   all the M-Track drivers from device manager.
   
2. Reboot the computer and check.
   

Method 3:



I suggest you login to the manufacturer site,
download the drivers for your registered device and
install it.



If you still face the issue, I suggest you to get in touch with the
manufacturer and get the hardware checked once.



Hope it helps.

Amit Sunar

Microsoft Community – Moderator

 

No Boot, Drives Not detected, Can't Load Win10 Pleses Help!

Until the BIOS sees your M.2, there's nothing you can do. It does not matter if the M.2 is unformatted/unallocated, the BIOS should see it.

1. Suggest that you take the M.2 out, clean all the contacts and re-seat it and hope this is the case.
2. If step one fails. Connect your 250GB SSD back in using one of the SATA port to see if the BIOS recognize it. If it doen't, then it might be something wrong with the MB, if it does then boot up the Windows Installation USB, run diskpart, shrink it at least 40GB then create a partition, Leave it unallocated then install Windows there.

Also try to re-seat all other components such as Memory, Video card etc...