Windows 10: L TYPE FILE FORMAT

Hi ,


How can I open L type file format.

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Cannot Format HD


Need to initialize it as GPT disk type with HD > 2TB:
From Admin command prompt:

1. diskpart
2. list disk =====> Take a note of disk # for the 4TB HD
3. select disk # ====> From step 2
4. clean
5. exit

Open Disk Management and initialize the disk as GPT, create simple then format.

 

Format SD Card

Hi! BarryKeane

I'm Marvin an Independent Advisor, and I will help you with your issue.

Try with this

Method 1. Run Diskpart to Format SD Card That Won't Format

Step 1. Press Windows key and R key at the same time, type cmd in the Run box, hit Enter to open the command prompt(cmd.exe).

Step 2. Type diskpart to run Diskpart Utility.

Step 3. Type list disk to list the drives on the computer.

Step 4. Type select disk 1 (The number should be replaced by the exact drive number of your SD card).

Step 5. Type clean to run the clean utility (this will wipe all data on the SD card so make sure you saved a copy or backup of the card data).

Step 6. Type create partition primary to create a new partition on the SD card.

Step 7. Type select partition 1 (it should be the newly created partition on step 6).

Step 8. Type active to make the partition active.

Step 9. Type format fs=ntfs （or format fs=fat32）to format the partition to the desired file system.

If you still having problems with this, I will be around to help you.

Regards.