Windows 10: Laptop boot up takes longer and getting Please Wait message

Hello Couple months ago I notice that my laptop has been showing [Please wait] anytime I boot up my laptop and it also it take way longer to boot up now, same goes with shutdown. I did a factory reset but that unfortunately didn't help at all.Please help.

:)

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Laptop no longer booting from HDD or recovery USB

According to this link: Booting to the Boot Menu and BIOS
Your laptop use F2 to access BIOS and F12 to access Boot Menu.

It will take a while to boot. Sometimes several minutes, Did you wait long enough ?

HBCD only works with MBR disk type and will not recognize GPT disk.

If still cannot boot from Recovery disk. Use your friend's computer and download Macrium Rescue disk from my G-Drive: MacRescue.iso - Google Drive
The iso is: MacRescue.iso, about 258MB.
NOTE: Use F2 to access BIOS: enable Boot Menu, disable Secure Boot, disable CSM.

1. Connect the USB to the PC. Use Disk Management (Win+R->Disk Management) to find out the disk # of the USB
2. Open Admin Command Prompt (Win+R->Command Prompt (Admin) and type:
   diskpart
   select disk # =====> where # is the disk number from step 1
   clean
   convert MBR
   create partition primary
   format fs=fat32 quick
   assign letter=R
   active
   exit
   bootsect /nt60 R: ====> This will updates the master boot code for the USB
   exit
3. Double click MacRescue.iso. This will mount the iso as a virtual DVD drive with a letter assigned, seen in This PC
4. copy the content of the virtual DVD to R: (Your USB)
5. Reboot your PC and keep tapping on F12 to access boot menu then select the usb with UEFI prefix to boot into GPT mode
6. Once booted. From the Macrium screen, click on Fix Windows Boot problems and follow the screen to complete
   
   
   
7. Reboot your PC.

NOTE: If still does not boot then the problem is in the C drive, System file(s) corrupted. You would need to boot from the Windows Installation disk to perform custom upgrade. Use step 2 above to create a bootable Windows Installation. Don't use Rufus.