Windows 10: Laptop bugging alot after it ran out of power mid-update.

My windows 10 running laptop was installing some security updates which had already strangely taken 30 minutes to get to 10% installing. Not sure when, but the laptop turned off at some point, which I thought was it finishing the install but was rather it running out of power. Later after I plugged in my charger it booted to a screen where it reversed the update.But after restarting after that, the HP boot screen was bugging alot, randomly magnifying into the hp logo, and at one point only showing 3 dots on screen in replacement of the HP logo and spinning wheel. Im now stuck on a please wait

:)

 

Laptop no longer charging since Windows 10 update

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

laptop battery wont charge after latest update

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s okay if you only have 1).

7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.

 

Laptop no longer hibernates on critical power

Hi Mike,

The laptop's battery is possibly wearing out. Since you haven't change any settings, we suggest that you change the critical battery level a bit higher so that your laptop can perform a hibernation on a much higher percentage than the default. Follow the
steps below:

• Type Power Options on the Start menu search bar.
• Under Battery, click on Critical battery level.
• Chang the default percentage to 10% or higher.
• Click on Apply.

Looking forward to your response.