Windows 10: Laptop constantly crashing to the blue "Didn't load correctly" And "BSOD" screen

Alienware m17 r5 amdI am by no means a professional which is why I might be asking common questionsI very frequently, everyday, run into my laptop crashing and going to the "Didn't load correctly" screen. The error code is not always the same either, it seems to almost always be different. BAD_POOL_CALLER and KERNEL_SECURITY_CHECK_FAILURE and others that I don't quite remember. This usually occurs after restarting my computer, leaving it idle to long, turning it off and back on again, and sometimes while i'm on the Didn't Load Correctly screen, it tells me my Device ran into a problem and ne

:)

 

Crash/blue screen

Hi

I assume from the title of your post Crash/Blue Screen that the PC has crashed and produced a *BSOD=[Blue Screen Of Death] =Blue Screen; and that the PC recovered from this; if and when you see the Blue Screen write the Stop Code down; recover the PC or use one that is working to access the net and look up the Stop Code.

nb: You may be able to view this with a [*BlueScreenView] application, google for this.

Edit Link - Blue screen of death (STOP error) information in dump files.

Description
===========

BlueScreenView scans all your minidump files created during 'blue screen
of death' crashes, and displays the information about all crashes in one
table. For each crash, BlueScreenView displays the minidump filename, the
date/time of the crash, the basic crash information displayed in the blue
screen (Bug Check Code and 4 parameters), and the details of the driver
or module that possibly caused the crash (filename, product name, file
description, and file version).
For each crash displayed in the upper pane, you can view the details of
the device drivers loaded during the crash in the lower pane.
BlueScreenView also mark the drivers that their addresses found in the
crash stack, so you can easily locate the suspected drivers that possibly
caused the crash.

atb

Law-II

 

Windows 10 BSOD freeze after sleep + blue screen on boot

I had the following problem:

I just fresh installed Windows 10 on my ThinkPad t450s and crashed after every sleep.

When the laptop is in sleep mode and I open it and press a key to wake it up:

• BSOD appears directly saying "Your PC ran into a problem and needs a restart. We're just collecting some error info, and then we'll restart for you. (0% complete) - [...] CRITICAL_PROCESS_DIED";
  
• OR login screen appears but everything is laggy and then the BSOD appears;
  
• OR once I've got as far as the desktop using the fingerprint device, but then the BSOD appeared, this time without the error name.
  

Never did the percentage change from 0% before the computer rebooted.

I updated the graphic card drivers and the Wi-Fi drivers, deactivated the quick boot and tried many bizarre suggestions from the internet, but nothing helped.

Now since the last sleep crash:

The computer doesn't work at all, it shows an empty blue screen after each startup.

I tried to repair Windows using the Windows 10 USB stick, but it fails to find anything wrong or to restore a previous build.

I found this post suggesting to delete a driver but I don't know how to do it as my drive is encrypted using BitLocker and the command prompt is telling me to use to control panel to unlock it.

 

Laptop loads to Windows 10 logo then blue screen and shuts off

shadowthefire,

What brand/model laptop is this?

Try the following:

Step 1: Make sure the computer is shut down, and press the Power Button to turn the computer on.

Step 2: As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off again.

Step 3: Repeat this process 2 or 3 times until you see the following on the screen: Preparing Automatic Repair
Let the computer boot to the Automatic Repair screen.

Step 4: The next screen (blue) goes to: Choose Account to continue
Select your account, enter your Password, and press: Continue

Step 5: A Diagnosing your PC screen appears, and it takes you to the screen for: Automatic Repair

Step 6: Here you can click Restart, or, Advanced Options
Step 6.1: Select: Restart

Allow the computer to go through the routine, and see if it solves the issue.

If the problem still exists, go back to Step 1 through Step 6.

Step 6.2: This time, click: Advanced Options

Step 7: In the Choose an Option screen, select: Troubleshoot

Step 8: At the next screen, select: Advanced Options

Step 9: Last, select: Startup Repair (Used for problems that keep Windows 10 from loading)

Please provide an update.