Windows 10: Laptop does not turn on when battery inserted + on ac, only when I take out and put back again

Hi,A Fujitsu-Siemens laptop usually not always does not turn on with power on button, even if it's pressed for a long, while it's on A/C, the battery is charging, or fully charged. It can be turned on after I take out the battery, put it back, sometimes after the second time after the battery was taken out. The laptop restarts, can be turned on from hibernation. This problem with turning on started after an update of win10 mainly.

:)

 

laptop battery wont charge after latest update

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s okay if you only have 1).

7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Laptop not booting to Windows 10 after new battery installed.

Hi Mr Bill,



Thank you for posting your query in Microsoft Community.

I would suggest you to contact your manufacturer regarding the battery issue. As of now you can power drain your laptop and check if it helps.

Follow the steps below:

• 
  Disconnect the AC Adapter.
  
• 
  Remove the Battery.
  
• 
  Hold the Power button down for 30 seconds to 1 minute.
  
• 
  Reconnect the AC adapter.
  
• 
  Turn on the laptop power.
  

Hope it helps.