Windows 10: Laptop not booting into bios or windows

I have a dell vostro 1520 laptop and every time i turn it on it refuses to boot into the bios let alone show me the startup icon. I am hoping someone can help. It is running windows 10 The display wont show when i turn it on i just get a error code where the number key is flashing and the caps lock and scroll lock lights are solid blue. any thoughts???? SOMEONE PLEASE HELPPP

:)

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Laptop not booting after bios update

Take it apart and try his suggestion is what I would do next. Still what a pain disassemble laptop to fix bios.
RE: Latitude 3330 BIOS update failure
Hi Alex,
sorry about my late. I don't know that you could fix your problem now, but I try help you.
You need remove the Lan card (modular part on motherboard ), because you have a problem with UEFI boot. You can enter in BIOS, if the LAN part is unplugged



RE: Latitude 3330 BIOS update failure







Hy everyone,
I fix this Bios Post error problem.

1. Switch off the computer.
2. Disconnect the AC adapter from the system.
3. Remove the battery from the computer
4. Remote HDD, keyboard, Palmrest
5. Put out the CMOS battery
6. Raise up the LAN/VGA part (2 screws)
7. Take a USB keyboard, connect the AC adapter and press F2
8. If you see the BIOS, almost finished.
9. Put on The CMOS battery, and step in: System configuration / integrated NIC / Turn off "Enable UEFI Network Stack"
10. Turn off and raise down the LAN/VGA part. Test Again. If everything is working you done.

I hope, I could help you
Regards
David

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award