Windows 10: Laptop problems with hibernation

My new laptop with Windows 11 goes into hibernation every night and it won't come out until I turn the computer off and back on. I was given information about finding out if the keyboard and mouse have permission to wake the computer but I don't have a power option in the keyboard properties to check and see. Why isn't the power option available if it's supposed to be and how can I fix that?

:)

 

Laptop no longer hibernates on critical power

Hi Mike,

The laptop's battery is possibly wearing out. Since you haven't change any settings, we suggest that you change the critical battery level a bit higher so that your laptop can perform a hibernation on a much higher percentage than the default. Follow the
steps below:

• Type Power Options on the Start menu search bar.
• Under Battery, click on Critical battery level.
• Chang the default percentage to 10% or higher.
• Click on Apply.

Looking forward to your response.

 

Windows 10 Hibernate problems

I suggest you to follow the methods provided below and check if it helps.

I suggest you to run the Power troubleshooter by following the steps below and check if for any power components change status.

• Press Windows logo key on the keyboard, type troubleshooting and select the top most search result.
• Click on View All from the left side panel of the window.
• Select Power from the options, click on Advanced option and check Apply repairs automatically option.
• Follow the on screen instructions and wait for the troubleshooting to complete.
• Check for the missing/corrupted power component status of the troubleshooter, close the window and check if the issue is resolved.

You can follow the step by step guide to
enable hibernate option in windows 10.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.