Windows 10: Laptop randomly can't boot from ssd or neither recognize it.

I am currenly using Lenovo Xiaoxin Pro 13. I just have updated it from Win 10 1909 to 20H2 this morning, and I also encounter blue screen issues. The problem is after the BSOD, the computer had restarted, and it popped up with Window Boot Manager as the only Boot Menu option.

I have tried using a USB Boot to start fresh but the problem is still unsolved. I have also dispatched the case and replug the SSD and when I have chances to boot using SSD, softwares still show that my SSD is 100% healthy.

I am still having tons of work on the computer so please reply me ASAP. Thank you all. *Error code: Critical Process Died

submitted by /u/hungphongtrn2307hn
[link] [comments]

:)

 

Laptops can't boot from optical HDD\SSD caddy :-(

Hello
I have been investigating *a lot* and trying to boot a 2015 year HP Pavilion DV7 17-f076no (Serial: J1X05EA#UUW) from a Chinese Ebay optical drive HDD\SSD caddy:
Read multiple forum questions that had the same problem as I: ( Bios can't find a bootable SSD inside optical caddy )
https://forums.lenovo.com/t5/Lenovo...find-caddy-SSD-in-BIOS-boot-list/td-p/3278964
Tom's Hardware: For The Hardcore PC Enthusiast

Startup:

• Cloned a 1000gb HDD containing 100/1000gb of Windows 10 Home 64-bit to a 500gb SSD with a EZ Gig IV 4.6.2 cloning software and a USB-SATA transfer cable.
• Original 1000gb HDD is still inside the laptop.
• DVD-drive replaced with a 500gb SSD caddy.

So far:

• The SSD (=2018 Samsung 860EVO 500gb) can be used and seen inside Windows 10. ( As a storage only )
• The 2015 Bios F.43 Rev.A American Megatrends Inc. can not see the SSD from the BIOS boot order. Windows Boot Manager sees only the original HDD.
• UEFI Legacy boot-mode is disabled. I don't think enabling it would help since I'm starting up Windows 10.

Solutions:

• Faulty caddy ? Chinese sellers sell many multiple variations of different 9.7mm thick caddys with different micro switches. This one had only a 1 pc of micro switch with 2 position choices.
• Bios is just not flexible enough. Open the 20+pcs of laptop screws and put the SSD to the place of the original HDD.
• UEFI Legacy mode ?
• Modding the caddy. Someone said the caddy is in a "power saving sleep mode" when inside BIOS and it is therefore unseen and shortening some pins would help ? Any experience in soldering the caddy electronics so that it is constantly awake ? This sounds believable ?
• Cloned the HDD twice to minimize errors but no help I doubt it is because of the cloning process and if it is it is because the HDD and SSD were not the same size 1000gb and 1000gb and the partitions don't match or so...?

Laptops are not easy...

 

Unable to boot Windows after cloning it to SSD

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you are facing issues while booting the PC after cloning Windows to new SSD. I would like to know what happens when you try to boot the PC to desktop using SSD?



The reason you are not able to boot the PC is that the files required to boot Windows are still recognizing the HDD as the main drive. I would suggest you to try rebuilding the BCD files and see if you are able to boot the PC using
SSD.



Kindly follow the steps below to rebuild the BCD.

1. Create a bootable media and boot the PC using the media.
2. On the Install Windows screen, select Next >
   Repair your computer.
3. On the System Recovery Options screen, select
   Troubleshoot> Advanced options > Command Prompt.
4. Now type in the commands and hit enter: BOOTREC /FIXMBR
   
   BOOTREC /FIXBOOT
   
   BOOTREC /scanos
   
   BOOTREC /rebuildbcd
5. Restart the PC.

If the issue persists, please get back to us with the results of the troubleshooting steps to assist you further.



Regards,

Prakhar Khare

Microsoft Community – Moderator

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.