Windows 10: Laptop shutdown when unplugged but battery says 100%

Hi.Two days ago I woke up and my laptop VivoBook_ASUSLaptop X580GD_N580GD didn't turn on unless it was plugged in, but when on windows battery icon says 100%. It has been like this since then, I've tried some solution: reset battery to default setting through powercfg, uninstall and re install driver, run troubleshooter but it only shows energy save option and run MyAsus battery diagnostic; but none of them worked.Maybe battery is dead but i tend not to think so cause i've change it a year ago back then I had the same problem but icon show battery at 0%. I don't know if it's some update

:)

 

Windows 10 - Laptop battery drainage while shutdown and unpluged


I upgraded my laptop from Windows 7 to Windows 10 recently. The laptop battery is now draining 20% overnight when the laptop is shutdown and unplugged. With Windows 7 the battery drainage was negligible (even over a week). The laptop is a Lenovo Thinkpad Type 1143-3FU. The Thinkpad has a red light which glows while on. After shutdown it now flashes a few times after shutdown before stopping (rather than just going out) which indicates to me that something is still running, but I do not know what. The laptop battery is good. The computer does not appear to be hibernating because when I start the computer it shows the Lenovo screen first thing. Any suggestions?

 

laptop battery wont charge after latest update

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s okay if you only have 1).

7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.