Windows 10: Laptop will not boot after failed update.

I'm having a serious issue right now with my laptop. I THINK it tried to install an update which failed while I was away from home and now I'm stuck in a loop. Very frustrating to say the least! So, I turn the laptop on and it attempts to run diagnostics, then gives me an option to restart or go to advanced settings. Choosing to restart locks the entire laptop up, I just get a permanent loading circle for as long as I wait.I can however load into safe mode after a message stating "we couldn't complete the updates, undoing changes" appears. Normal mode will not load under any circumstance which

:)

 

Windows 10 fails to update


When you finish testing the Avast suggestion, make sure that you restart your machine.

Then if the issue persists, please return to the trouble shooting list in post# 89

I think there are three steps that remain; the WU troubleshooter, reset WU components, and manual WU reset.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Windows update failed and unable to boot

Hi Chrissy,

To assist you better help us with the information below.

• Have you made any recent software/hardware changes to the computer?
• Do you get any error message or code when trying to boot into the computer?

When installing updates it puts message “Do not shut down your machine”, if you unplug the AC adapter or turn off the computer Chances are:

• Windows resuming the installation process next time you shutdown.
• A non-vital program file becomes corrupted and causes some feature of the OS to become unusable and crash.

As an initial step I would suggest you to unplug all external devices if connected and then try to boot the computer by plugging in the AC adapter and check if you are able to boot the computer.

If the computer boots make sure all the updates are installed and then you can login to user Interface.

If you still not able to unable to get the in Windows Bootable environment I Would suggest you contact your manufacturer.

Get back to us if your require more help on this query.

Thank you.