Windows 10: Laptop won't boot - Advanced Options failing

My Acer laptop won't boot. I have installed the ISO on a USB, but the computer restarts when I attempt troubleshooting in the Advanced Options. Any ideas where I go from here?

:)

 

How does Windows boot to advanced recovery option e.g. command prompt?

- that gives me a 454 'Unexpected error' This tells me that the BCD is partially corrupted.

The commands: shutdown.exe /r /o /f /t 00
or: %SystemRoot%\System32\Cmd.exe /c reagentc /boottore&shutdown /r /f /t 00
should boot into Recovery if everything is configured correctly.
FYI, If Windows is configured correctly:

1. If Reagentc is disabled, you still can get into Recovery but with limited options.
2. If Reagentc is enabled, you'll get all options.
3. If you boot Windows using Recovery USB stick, You'll get into Recovery with couple of options missing.

Here's my suggestion if you want to try:
OPTION 1: Will save the trouble of re-install Windows.

1. Download the image of my first 3 partitions (450MB Recovery, 100 MB EFI partition, and 16MB unformatted primary)
   EFI_Boot-00-00.7z - Google Drive
2. Run Macrium and restore the image from step 1, overwriting your existing 1st three partitions, leaving C alone.
3. Delete the 490MB Recovery partition.
4. From Macrium, run fix boot problems.
5. Reboot. Open Admin command prompt then run Reagentc /info to make sure that it is enabled. If not, enable it.
   if failed to enable, reboot and try again.

OPTION 2: Assuming you've already had Windows backup with Macrium.

1. Wipe out the first 5 parttiions. (450MB, 100MB, 16MB, C Drive, 480MB)
2. Fresh install Windows 10
3. Restore C drive from backup image, run fix boot problems
4. repeat step 5 from OPTION 1 above.

 

Critical Service Failed - Automatic Repair and Advanced Options

Update:
Tried the Repair disk. Still back to "Your pc ran into a problem", "Preparing automatic repair" followed by Advanced Options which have been tried again.

Would anyone recommend:

• bootrec.exe /rebuildbcd
• bootrec.exe /fixmbr
• bootrec.exe /fixboot

Otherwise, I have a bootable Win PE file waiting to be burned on to USB key, as suggested by other Forum user, but unsure what to do with it when (or if) it boots up the laptop.

 

Laptop went black and won;t reboot

Hi Andree,

Hardware and software conflict is one of the possible reasons why you're experiencing black screen. Sometimes, it is also because of hardware failure. To get this issue fixed, we suggest that you
boot into Safe Mode by following these steps:

• Turn off your computer 3 times while booting. Windows should automatically boot to the Recovery Environment after 3 unsuccessful attempts in a row.
  
• Once you are within the Recovery Environment, select Troubleshoot, and then
  Advanced options, then Startup Settings, and
  Restart. When it restarts, you should see a number of options. Press 5 or F5 for
  Safe Mode with Networking.

Once your computer is in Safe Mode, please follow the workaround provided on this
link. Simply select the similar case that you're experiencing to show the troubleshooting steps.

Let us know how it works.